GE Cafe 30 Gas Cooktop
GE Cafe 30 Gas Cooktop
Description
The GE Cafe CGP70302NS1 is a premium 30-inch built-in gas cooktop featuring five sealed burners with outputs ranging from 5,000 to 18,000 BTU providing professional-grade performance with elegant design including white LED backlit knobs and continuous cast-iron grates. This verified cutout template ensures precise fabrication for granite quartz marble and other solid surface countertops.
Dimensions
- Overall Width
- 30"
- Overall Depth
- 21"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- GE Cafe
- Model Number
- CGP70302NS1
- Downloads
- 0
Related Templates
Answer summary
What is the GE Cafe 30 Gas Cooktop DXF template for?
GE Cafe 30 Gas Cooktop is a cooktop & range cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the GE Cafe 30 Gas Cooktop DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
GE Cafe 30 Gas Cooktop is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for GE Cafe 30 Gas Cooktop
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
GE Cafe CGP70302NS1 is filed under Cooktop & Range Cutouts. The normalized record lists width 30", depth 21", corner radius 0.5", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Cooktop & Range Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with GE Cafe 36 Gas Cooktop, GE Cafe 30 Electric Cooktop, GE Cafe 36 Electric Cooktop to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The GE Cafe CGP70302NS1 is a premium 30-inch built-in gas cooktop featuring five sealed burners with outputs ranging from 5,000 to 18,000 BTU providing professional-grade performance with elegant design including white LED backlit knobs and continuous cast-iron grates. This verified cutout template ensures precise fabrication for granite quartz marble and other solid surface countertops.
Installation Overview
Installing the CGP70302NS1 requires a precisely cut opening measuring 28.5 inches wide by 19.625 inches deep with 0.5-inch corner radius. Ensure adequate clearance with minimum 18 inches from countertop to overhead combustibles. Requires 120V electrical for electronic ignition and natural gas connection convertible to LP. Proper ventilation essential typically requiring range hood rated for 300 CFM minimum.
CNC Cutting Notes
Load this DXF template verifying exact 28.5 x 19.625 inch dimensions. Use 0.5 to 0.75 inch diamond bits for stone cutting with appropriate tool offset. Feed rate 50-100 IPM based on material hardness. Program multiple depth passes maximum 0.25 inch per pass. Apply masking tape and use wet cutting for natural stone.
Material Compatibility
Engineered for granite engineered quartz marble quartzite soapstone concrete and solid surface. Minimum 3cm thickness recommended. The 50-pound cooktop requires solid support around cutout perimeter. Avoid laminate or tile for gas installations.
Where to Buy
Available from Home Depot Lowes Best Buy AJ Madison Appliances Connection ABT Electronics and specialty stores. Pricing ranges $1,200-$1,600. Request installation manual and spec sheet for your fabricator.