Fisher & Paykel 30 Gas Cooktop
Description
Fisher & Paykel's CDV3304N brings commercial-grade cooking performance to residential countertop installations with its 4-burner professional gas platform. From a fabrication standpoint, this 30-inch cooktop presents unique challenges due to its sealed burner design and precise mounting requirements. Our DXF template delivers manufacturer-exact cutout specifications optimized for natural stone, engineered quartz, and solid surface materials. The relatively compact 28.375-inch cutout width offers exceptional flexibility for kitchen layouts while maintaining structural integrity in standard 25-inch depth countertops.
Dimensions
- Overall Width
- 30"
- Overall Depth
- 21"
- Corner Radius
- 0.5"
Specifications
- Manufacturer
- Fisher & Paykel
- Model Number
- CDV3304N
- Downloads
- 0
Related Templates
Fisher & Paykel 36 Gas Cooktop
Fisher & Paykel
Fisher & Paykel 30 Electric Cooktop
Fisher & Paykel
Fisher & Paykel 30 Induction Cooktop
Fisher & Paykel
Fisher & Paykel 36 Induction Cooktop
Fisher & Paykel
Fisher & Paykel's CDV3304N brings commercial-grade cooking performance to residential countertop installations with its 4-burner professional gas platform. From a fabrication standpoint, this 30-inch cooktop presents unique challenges due to its sealed burner design and precise mounting requirements. Our DXF template delivers manufacturer-exact cutout specifications optimized for natural stone, engineered quartz, and solid surface materials. The relatively compact 28.375-inch cutout width offers exceptional flexibility for kitchen layouts while maintaining structural integrity in standard 25-inch depth countertops.
Installation Overview
The CDV3304N cutout measures 28.375 inches wide by 19.5 inches deep—dimensions that allow comfortable installation in 30-inch cabinet bases with adequate side clearance for mounting clip access. Unlike drop-in cooktops that rely on rim support, this professional-style unit utilizes an undermount bracket system requiring precise cutout tolerances. Fabricators must maintain the 0.5-inch corner radius specification to ensure proper gasket compression and prevent gas leakage around the appliance perimeter. The 21-inch overall depth sits well within standard countertop dimensions, leaving approximately 4 inches of stone from cutout to front edge in 25-inch installations. This forward positioning is critical for gas line routing and access panel clearance. When working with seamed installations, never position joints within 8 inches of the cutout—gas appliances generate significant thermal cycling that can stress improperly located seams over time.
CNC Cutting Notes
Programming CNC toolpaths for gas cooktop cutouts demands attention to both dimensional accuracy and edge finish quality. Start with a 0.5-inch or 0.625-inch radius carbide end mill for corner execution, ensuring the bit diameter matches or exceeds the specified radius to prevent multi-pass corner artifacts. For granite cutting, implement a climb-milling strategy with three-pass depth increments: 30% depth roughing, 60% semi-finish, and full-depth final pass at 50% feed rate. Keep spindle RPM between 12,000-18,000 for carbide tooling to minimize heat buildup and edge micro-chipping. Waterjet operators should position pierce points at least 3 inches from corner intersections and reduce cutting speed by 25% through radius transitions to maintain abrasive stream coherency. The 28.375-inch width tolerance is critical—hold within ±0.050 inches to ensure mounting brackets engage properly without forcing. For bridge saw operations, score the cutout perimeter before full-depth cutting to reduce edge blowout, especially in coarse-grain granites. Post-cutting, hand-finish all edges with 220-grit diamond pads to remove tooling marks that could catch on mounting gaskets.
Material Compatibility
Fisher & Paykel's professional cooktops integrate successfully with diverse countertop materials when proper fabrication techniques are applied. **Granite:** Optimal choice for gas appliances due to exceptional heat resistance and structural stability. Dense varieties like Black Pearl, Steel Grey, and Tan Brown handle thermal cycling without expansion issues. Use wet cutting exclusively to prevent heat-induced micro-cracking. **Quartz and engineered surfaces:** Fully compatible but requires edge consideration. Position cutouts away from resin-heavy color veining in materials like Calacatta quartz—sustained heat can cause slight discoloration over years. Router speeds should not exceed 15,000 RPM to prevent resin burning during cutting. **Marble and soft stones:** Use with caution. Materials like Carrara and Travertine may experience etching from cooking spills and require frequent sealing. Reinforce cutout perimeters with metal channels when using stones rated below 8 on Mohs hardness scale. **Solid surface:** Compatible but requires continuous support within 4 inches of all cutout edges. Material flexibility necessitates backing reinforcement to prevent appliance settling. **Porcelain slabs:** Excellent thermal stability makes these ideal for gas cooktops, but requires waterjet cutting with specialized abrasive feeds. Ultra-thin porcelain (under 12mm) should include steel reinforcement frames.
Where to Buy
The Fisher & Paykel CDV3304N is available through premium appliance retailers including US Appliance, Designer Appliances, AJ Madison, and authorized Fisher & Paykel dealers nationwide. Fabricators should coordinate with clients to verify the specific fuel type (natural gas vs. propane) as mounting configurations may vary slightly between models. Establish trade accounts with regional appliance distributors for access to specification sheets, installation manuals, and technical support resources. Ferguson Enterprises and Hajoca Corporation offer commercial contractor programs with competitive pricing for multi-unit installations. Always confirm appliance dimensions against the actual delivered unit before final fabrication—manufacturers occasionally update mounting systems without model number changes. Request installation templates directly from Fisher & Paykel's trade resources portal for critical projects requiring absolute dimensional verification.