Park Industries FASTBACK II - Soft Marble (Carrara, Calacatta) - Full Bullnose
Park Industries FASTBACK II
edge_polishing Preset
Processing Parameters
Conveyor Speed
52.1ipm
Spindle Count
8heads
Tool Sequence
50_grit_metal_bond
50 grit metal bond
2,650 RPM
25.5 PSI
100_grit_metal_bond
100 grit metal bond
2,800 RPM
23.8 PSI
200_grit_metal_bond
200 grit metal bond
2,950 RPM
22.1 PSI
400_grit_resin_bond
400 grit resin bond
3,100 RPM
20.4 PSI
800_grit_resin_bond
800 grit resin bond
3,250 RPM
18.7 PSI
1500_grit_resin_bond
1500 grit resin bond
3,400 RPM
17 PSI
3000_grit_resin_bond
3000 grit resin bond
3,550 RPM
15.3 PSI
buff_pad
buff pad
4,100 RPM
13.6 PSI
Notes
Most popular edge polisher. 8 spindle positions. Inline conveyor. Profile: Full Bullnose. Material: Soft marbles cut fast but are fragile. Mohs 3-4. Carrara, Calacatta, White Carrara.
Description
The Park Industries FASTBACK II - Soft Marble (Carrara, Calacatta) - Full Bullnose is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- park
- Material
- Soft Marble (Carrara, Calacatta)
- Downloads
- 0
CNC Preset Details
- Machine ID
- park-fastback-ii
- Machine Name
- Park Industries FASTBACK II
- Material ID
- soft-marble
- Material Name
- Soft Marble (Carrara, Calacatta)
- Material Group
- natural_stone
- Preset Type
- edge_polishing
- Priority
- P1
- Post Processor
- none
- Notes
- Most popular edge polisher. 8 spindle positions. Inline conveyor. Profile: Full Bullnose. Material: Soft marbles cut fast but are fragile. Mohs 3-4. Carrara, Calacatta, White Carrara.
- Conveyor Speed
- 52.1 ipm
- Spindle Count
- 8
Machine Parameters
Tool Sequence
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Park Industries Destiny - Caesarstone Quartz Cutting Preset
park
CNC Preset
Park Industries Destiny - Cambria Quartz Cutting Preset
park
CNC Preset
Park Industries Destiny - Compac Quartz Cutting Preset
park
CNC Preset
Park Industries Destiny - Concrete Cutting Preset
park
The Park Industries FASTBACK II - Soft Marble (Carrara, Calacatta) - Full Bullnose is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the Park Industries FASTBACK II - Soft Marble (Carrara, Calacatta) - Full Bullnose begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
CNC programming for the Park Industries FASTBACK II - Soft Marble (Carrara, Calacatta) - Full Bullnose should account for tool wear compensation, especially on abrasive engineered quartz stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The full-bullnose geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Park Industries FASTBACK II - Soft Marble (Carrara, Calacatta) - Full Bullnose template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the full-bullnose geometry.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.