OMAX MAXIEM - Hanstone Quartz (Hyundai L&C) Cutting Preset
OMAX MAXIEM
cutting Preset
Processing Parameters
Notes
Mid-range OMAX waterjet. Reliable for daily production. Material: Hyundai L&C manufactured quartz. Reliable and consistent.
Description
The OMAX MAXIEM - Hanstone Quartz (Hyundai L&C) Cutting Preset is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- omax
- Material
- Hanstone Quartz (Hyundai L&C)
- Downloads
- 0
CNC Preset Details
- Machine ID
- omax-maxiem
- Machine Name
- OMAX MAXIEM
- Machine Type
- waterjet
- Material ID
- hanstone-quartz
- Material Name
- Hanstone Quartz (Hyundai L&C)
- Material Group
- engineered_quartz
- Preset Type
- cutting
- Priority
- P1
- Post Processor
- omax_intelli-max
- CNC Controller
- OMAX Intelli-MAX
- Notes
- Mid-range OMAX waterjet. Reliable for daily production. Material: Hyundai L&C manufactured quartz. Reliable and consistent.
Machine Parameters
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
OMAX GlobalMAX - Caesarstone Quartz Cutting Preset
omax
CNC Preset
OMAX GlobalMAX - Cambria Quartz Cutting Preset
omax
CNC Preset
OMAX GlobalMAX - Compac Quartz Cutting Preset
omax
CNC Preset
OMAX GlobalMAX - Concrete Cutting Preset
omax
The OMAX MAXIEM - Hanstone Quartz (Hyundai L&C) Cutting Preset is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
Installing the OMAX MAXIEM - Hanstone Quartz (Hyundai L&C) Cutting Preset template requires standard stone fabrication procedures adapted for the cnc-presets category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
CNC programming for the OMAX MAXIEM - Hanstone Quartz (Hyundai L&C) Cutting Preset should account for tool wear compensation, especially on abrasive engineered quartz stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The omax geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
This omax profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.