Intermac Pro Series - Marble (Generic Mid-Range) Cutting Preset
Intermac Pro Series
cutting Preset
Processing Parameters
Notes
Advanced Intermac router for high-end fabrication. Material: Generic marble parameters for mid-range hardness marbles.
Description
The Intermac Pro Series - Marble (Generic Mid-Range) Cutting Preset template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the cnc-presets category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Dimensions
Specifications
- Manufacturer
- intermac
- Material
- Marble (Generic Mid-Range)
- Downloads
- 0
CNC Preset Details
- Machine ID
- intermac-pro-series
- Machine Name
- Intermac Pro Series
- Machine Type
- router
- Material ID
- marble-generic
- Material Name
- Marble (Generic Mid-Range)
- Material Group
- natural_stone
- Preset Type
- cutting
- Priority
- P2
- Post Processor
- intermac
- CNC Controller
- Intermac iCNC
- Notes
- Advanced Intermac router for high-end fabrication. Material: Generic marble parameters for mid-range hardness marbles.
Machine Parameters
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Intermac Genius CT - Caesarstone Quartz Cutting Preset
intermac
CNC Preset
Intermac Genius CT - Cambria Quartz Cutting Preset
intermac
CNC Preset
Intermac Genius CT - Compac Quartz Cutting Preset
intermac
CNC Preset
Intermac Genius CT - Concrete Cutting Preset
intermac
The Intermac Pro Series - Marble (Generic Mid-Range) Cutting Preset template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the cnc-presets category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Installation Overview
The fabrication process for the Intermac Pro Series - Marble (Generic Mid-Range) Cutting Preset begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
Optimal CNC settings for the Intermac Pro Series - Marble (Generic Mid-Range) Cutting Preset template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The intermac profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Intermac Pro Series - Marble (Generic Mid-Range) Cutting Preset template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the intermac geometry.
Where to Buy
Professional fabricators can source marble slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.