Intermac Pro Series - Generic Budget Quartz Cutting Preset
Intermac Pro Series
cutting Preset
Processing Parameters
Notes
Advanced Intermac router for high-end fabrication. Material: Generic/unbranded quartz. Use as baseline parameters.
Description
The Intermac Pro Series - Generic Budget Quartz Cutting Preset is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- intermac
- Material
- Generic Budget Quartz
- Downloads
- 0
CNC Preset Details
- Machine ID
- intermac-pro-series
- Machine Name
- Intermac Pro Series
- Machine Type
- router
- Material ID
- generic-budget-quartz
- Material Name
- Generic Budget Quartz
- Material Group
- engineered_quartz
- Preset Type
- cutting
- Priority
- P2
- Post Processor
- intermac
- CNC Controller
- Intermac iCNC
- Notes
- Advanced Intermac router for high-end fabrication. Material: Generic/unbranded quartz. Use as baseline parameters.
Machine Parameters
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Intermac Genius CT - Caesarstone Quartz Cutting Preset
intermac
CNC Preset
Intermac Genius CT - Cambria Quartz Cutting Preset
intermac
CNC Preset
Intermac Genius CT - Compac Quartz Cutting Preset
intermac
CNC Preset
Intermac Genius CT - Concrete Cutting Preset
intermac
The Intermac Pro Series - Generic Budget Quartz Cutting Preset is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the Intermac Pro Series - Generic Budget Quartz Cutting Preset begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
CNC programming for the Intermac Pro Series - Generic Budget Quartz Cutting Preset should account for tool wear compensation, especially on abrasive dolomite stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The intermac geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Intermac Pro Series - Generic Budget Quartz Cutting Preset template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the intermac geometry.
Where to Buy
Professional fabricators can source dolomite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.