GMM BRX 400 - Neolith (TheSize) Cutting Preset
GMM BRX 400
cutting Preset
Processing Parameters
Notes
Italian bridge saw with excellent build quality. Material: Spanish sintered stone similar to Dekton. Same extreme caution required.
Description
The GMM BRX 400 - Neolith (TheSize) Cutting Preset is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- gmm
- Material
- Neolith (TheSize)
- Downloads
- 0
CNC Preset Details
- Machine ID
- gmm-brx-400
- Machine Name
- GMM BRX 400
- Machine Type
- bridge_saw
- Material ID
- neolith
- Material Name
- Neolith (TheSize)
- Material Group
- ultracompact
- Preset Type
- cutting
- Priority
- P2
- Post Processor
- gmm
- CNC Controller
- GMM CNC
- Notes
- Italian bridge saw with excellent build quality. Material: Spanish sintered stone similar to Dekton. Same extreme caution required.
Machine Parameters
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
GMM BRX 400 - Caesarstone Quartz Cutting Preset
gmm
CNC Preset
GMM BRX 400 - Cambria Quartz Cutting Preset
gmm
CNC Preset
GMM BRX 400 - Compac Quartz Cutting Preset
gmm
CNC Preset
GMM BRX 400 - Concrete Cutting Preset
gmm
The GMM BRX 400 - Neolith (TheSize) Cutting Preset is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the GMM BRX 400 - Neolith (TheSize) Cutting Preset begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
Optimal CNC settings for the GMM BRX 400 - Neolith (TheSize) Cutting Preset template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The gmm profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
This gmm profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source dolomite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.