Donatoni SX5 - Soft Granite (Uba Tuba, Black Galaxy) Cutting Preset
Donatoni SX5
cutting Preset
Processing Parameters
Notes
Donatoni 5-axis bridge saw. Material: Soft granites like Uba Tuba, Black Galaxy. Mohs 6-6.5. Baseline feed rate.
Description
The Donatoni SX5 - Soft Granite (Uba Tuba, Black Galaxy) Cutting Preset template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the cnc-presets category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Dimensions
Specifications
- Manufacturer
- donatoni
- Material
- Soft Granite (Uba Tuba, Black Galaxy)
- Downloads
- 0
CNC Preset Details
- Machine ID
- donatoni-sx5
- Machine Name
- Donatoni SX5
- Machine Type
- bridge_saw
- Material ID
- soft-granite
- Material Name
- Soft Granite (Uba Tuba, Black Galaxy)
- Material Group
- natural_stone
- Preset Type
- cutting
- Priority
- P2
- Post Processor
- donatoni
- CNC Controller
- Donatoni CNC
- Notes
- Donatoni 5-axis bridge saw. Material: Soft granites like Uba Tuba, Black Galaxy. Mohs 6-6.5. Baseline feed rate.
Machine Parameters
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Donatoni Jet 625 - Caesarstone Quartz Cutting Preset
donatoni
CNC Preset
Donatoni Jet 625 - Cambria Quartz Cutting Preset
donatoni
CNC Preset
Donatoni Jet 625 - Compac Quartz Cutting Preset
donatoni
CNC Preset
Donatoni Jet 625 - Concrete Cutting Preset
donatoni
The Donatoni SX5 - Soft Granite (Uba Tuba, Black Galaxy) Cutting Preset template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the cnc-presets category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Installation Overview
The fabrication process for the Donatoni SX5 - Soft Granite (Uba Tuba, Black Galaxy) Cutting Preset begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
CNC programming for the Donatoni SX5 - Soft Granite (Uba Tuba, Black Galaxy) Cutting Preset should account for tool wear compensation, especially on abrasive marble stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The donatoni geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Donatoni SX5 - Soft Granite (Uba Tuba, Black Galaxy) Cutting Preset profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the donatoni geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source marble slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.