Donatoni SX5 - Pental Quartz Cutting Preset
Donatoni SX5
cutting Preset
Processing Parameters
Notes
Donatoni 5-axis bridge saw. Material: Pental brand quartz. Mid-range option.
Description
The Donatoni SX5 - Pental Quartz Cutting Preset template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the cnc-presets category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Dimensions
Specifications
- Manufacturer
- donatoni
- Material
- Pental Quartz
- Downloads
- 0
CNC Preset Details
- Machine ID
- donatoni-sx5
- Machine Name
- Donatoni SX5
- Machine Type
- bridge_saw
- Material ID
- pental-quartz
- Material Name
- Pental Quartz
- Material Group
- engineered_quartz
- Preset Type
- cutting
- Priority
- P2
- Post Processor
- donatoni
- CNC Controller
- Donatoni CNC
- Notes
- Donatoni 5-axis bridge saw. Material: Pental brand quartz. Mid-range option.
Machine Parameters
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Donatoni Jet 625 - Caesarstone Quartz Cutting Preset
donatoni
CNC Preset
Donatoni Jet 625 - Cambria Quartz Cutting Preset
donatoni
CNC Preset
Donatoni Jet 625 - Compac Quartz Cutting Preset
donatoni
CNC Preset
Donatoni Jet 625 - Concrete Cutting Preset
donatoni
The Donatoni SX5 - Pental Quartz Cutting Preset template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the cnc-presets category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Installation Overview
Installing the Donatoni SX5 - Pental Quartz Cutting Preset template requires standard stone fabrication procedures adapted for the cnc-presets category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
CNC programming for the Donatoni SX5 - Pental Quartz Cutting Preset should account for tool wear compensation, especially on abrasive marble stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The donatoni geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Donatoni SX5 - Pental Quartz Cutting Preset template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the donatoni geometry.
Where to Buy
Professional fabricators can source marble slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.