Comandulli Star - Neolith (TheSize) - Laminated Bullnose
Comandulli Star
edge_polishing Preset
Processing Parameters
Conveyor Speed
14.3ipm
Spindle Count
6heads
Tool Sequence
50_grit_metal_bond
50 grit metal bond
2,650 RPM
34.5 PSI
100_grit_metal_bond
100 grit metal bond
2,800 RPM
32.2 PSI
200_grit_metal_bond
200 grit metal bond
2,950 RPM
29.9 PSI
400_grit_metal_bond
400 grit metal bond
3,100 RPM
27.6 PSI
800_grit_resin_bond
800 grit resin bond
3,250 RPM
25.3 PSI
buff_pad
buff pad
3,700 RPM
23 PSI
Notes
Italian 6-spindle edge polisher. Compact design. Profile: Laminated Bullnose. Material: Spanish sintered stone similar to Dekton. Same extreme caution required.
Description
The Comandulli Star - Neolith (TheSize) - Laminated Bullnose is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- comandulli
- Material
- Neolith (TheSize)
- Downloads
- 0
CNC Preset Details
- Machine ID
- comandulli-star
- Machine Name
- Comandulli Star
- Material ID
- neolith
- Material Name
- Neolith (TheSize)
- Material Group
- ultracompact
- Preset Type
- edge_polishing
- Priority
- P2
- Post Processor
- none
- Notes
- Italian 6-spindle edge polisher. Compact design. Profile: Laminated Bullnose. Material: Spanish sintered stone similar to Dekton. Same extreme caution required.
- Conveyor Speed
- 14.3 ipm
- Spindle Count
- 6
Machine Parameters
Tool Sequence
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Comandulli Omega - Caesarstone Quartz - Bevel
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Chiseled / Rock Face
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Cove
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Double Ogee
comandulli
The Comandulli Star - Neolith (TheSize) - Laminated Bullnose is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the Comandulli Star - Neolith (TheSize) - Laminated Bullnose begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
Optimal CNC settings for the Comandulli Star - Neolith (TheSize) - Laminated Bullnose template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The laminated-bullnose profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
This laminated-bullnose profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.