Comandulli Star - Dekton (Cosentino) - Half Bullnose
Comandulli Star
edge_polishing Preset
Processing Parameters
Conveyor Speed
18.2ipm
Spindle Count
6heads
Tool Sequence
50_grit_metal_bond
50 grit metal bond
2,650 RPM
34.5 PSI
100_grit_metal_bond
100 grit metal bond
2,800 RPM
32.2 PSI
200_grit_metal_bond
200 grit metal bond
2,950 RPM
29.9 PSI
400_grit_metal_bond
400 grit metal bond
3,100 RPM
27.6 PSI
800_grit_resin_bond
800 grit resin bond
3,250 RPM
25.3 PSI
buff_pad
buff pad
3,700 RPM
23 PSI
Notes
Italian 6-spindle edge polisher. Compact design. Profile: Half Bullnose. Material: Ultra-hard sintered stone. Mohs 8+. Treat like ceramic — slow and steady wins.
Description
The Comandulli Star - Dekton (Cosentino) - Half Bullnose is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- comandulli
- Material
- Dekton (Cosentino)
- Downloads
- 0
CNC Preset Details
- Machine ID
- comandulli-star
- Machine Name
- Comandulli Star
- Material ID
- dekton
- Material Name
- Dekton (Cosentino)
- Material Group
- ultracompact
- Preset Type
- edge_polishing
- Priority
- P2
- Post Processor
- none
- Notes
- Italian 6-spindle edge polisher. Compact design. Profile: Half Bullnose. Material: Ultra-hard sintered stone. Mohs 8+. Treat like ceramic — slow and steady wins.
- Conveyor Speed
- 18.2 ipm
- Spindle Count
- 6
Machine Parameters
Tool Sequence
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Comandulli Omega - Caesarstone Quartz - Bevel
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Chiseled / Rock Face
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Cove
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Double Ogee
comandulli
The Comandulli Star - Dekton (Cosentino) - Half Bullnose is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
Installing the Comandulli Star - Dekton (Cosentino) - Half Bullnose template requires standard stone fabrication procedures adapted for the cnc-presets category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
Optimal CNC settings for the Comandulli Star - Dekton (Cosentino) - Half Bullnose template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The half-bullnose profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Comandulli Star - Dekton (Cosentino) - Half Bullnose template works exceptionally well with natural granite, providing clean edges that polish to a high gloss. Marble is also compatible, though the softer stone requires reduced feed rates during CNC operations to prevent micro-chipping. Quartzite offers excellent results with this profile, as the hard mineral structure holds fine details well. Engineered quartz composites are ideal substrates, offering consistent material properties that produce predictable results. Soapstone and slate can be profiled using this template with appropriate tooling adjustments. For limestone, use conservative CNC parameters due to the stone's tendency to chip on detailed profiles. Porcelain sintered stone panels require specialized diamond tooling but produce excellent results with the half-bullnose geometry.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.