Comandulli Sfera - Silestone / Cosentino Quartz - Triple Pencil
Comandulli Sfera
edge_polishing Preset
Processing Parameters
Conveyor Speed
39.4ipm
Spindle Count
12heads
Tool Sequence
30_grit_metal_bond
30 grit metal bond
2,650 RPM
30 PSI
50_grit_metal_bond
50 grit metal bond
2,800 RPM
28 PSI
100_grit_metal_bond
100 grit metal bond
2,950 RPM
26 PSI
200_grit_metal_bond
200 grit metal bond
3,100 RPM
24 PSI
400_grit_resin_bond
400 grit resin bond
3,250 RPM
22 PSI
600_grit_resin_bond
600 grit resin bond
3,400 RPM
20 PSI
800_grit_resin_bond
800 grit resin bond
3,550 RPM
18 PSI
1500_grit_resin_bond
1500 grit resin bond
3,700 RPM
16 PSI
3000_grit_resin_bond
3000 grit resin bond
3,850 RPM
14 PSI
5000_grit_resin_bond
5000 grit resin bond
4,000 RPM
12 PSI
8000_grit_resin_bond
8000 grit resin bond
4,150 RPM
10 PSI
buff_pad
buff pad
4,500 RPM
8 PSI
Notes
Top-tier Italian 12-spindle edge polisher. Mirror finish capable. Profile: Triple Pencil. Material: Cosentino's quartz brand. Newer HybriQ+ has reduced silica content.
Description
The Comandulli Sfera - Silestone / Cosentino Quartz - Triple Pencil is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- comandulli
- Material
- Silestone / Cosentino Quartz
- Downloads
- 0
CNC Preset Details
- Machine ID
- comandulli-sfera
- Machine Name
- Comandulli Sfera
- Material ID
- silestone-quartz
- Material Name
- Silestone / Cosentino Quartz
- Material Group
- engineered_quartz
- Preset Type
- edge_polishing
- Priority
- P3
- Post Processor
- none
- Notes
- Top-tier Italian 12-spindle edge polisher. Mirror finish capable. Profile: Triple Pencil. Material: Cosentino's quartz brand. Newer HybriQ+ has reduced silica content.
- Conveyor Speed
- 39.4 ipm
- Spindle Count
- 12
Machine Parameters
Tool Sequence
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Comandulli Omega - Caesarstone Quartz - Bevel
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Chiseled / Rock Face
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Cove
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Double Ogee
comandulli
The Comandulli Sfera - Silestone / Cosentino Quartz - Triple Pencil is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the Comandulli Sfera - Silestone / Cosentino Quartz - Triple Pencil begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
Optimal CNC settings for the Comandulli Sfera - Silestone / Cosentino Quartz - Triple Pencil template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The triple-pencil profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Comandulli Sfera - Silestone / Cosentino Quartz - Triple Pencil profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the triple-pencil geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source dolomite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.