Comandulli Omega - Slate - DuPont
Comandulli Omega
edge_polishing Preset
Processing Parameters
Conveyor Speed
40.7ipm
Spindle Count
8heads
Tool Sequence
50_grit_metal_bond
50 grit metal bond
2,650 RPM
25.5 PSI
100_grit_metal_bond
100 grit metal bond
2,800 RPM
23.8 PSI
200_grit_metal_bond
200 grit metal bond
2,950 RPM
22.1 PSI
400_grit_resin_bond
400 grit resin bond
3,100 RPM
20.4 PSI
800_grit_resin_bond
800 grit resin bond
3,250 RPM
18.7 PSI
1500_grit_resin_bond
1500 grit resin bond
3,400 RPM
17 PSI
3000_grit_resin_bond
3000 grit resin bond
3,550 RPM
15.3 PSI
buff_pad
buff pad
4,100 RPM
13.6 PSI
Notes
Italian 8-spindle edge polisher. Good balance of speed and quality. Profile: DuPont. Material: Foliated metamorphic rock. Mohs 3-4. Watch for delamination.
Description
Professional fabricators turn to the Comandulli Omega - Slate - DuPont template for accurate cnc-presets production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Dimensions
Specifications
- Manufacturer
- comandulli
- Material
- Slate
- Downloads
- 0
CNC Preset Details
- Machine ID
- comandulli-omega
- Machine Name
- Comandulli Omega
- Material ID
- slate
- Material Name
- Slate
- Material Group
- natural_stone
- Preset Type
- edge_polishing
- Priority
- P2
- Post Processor
- none
- Notes
- Italian 8-spindle edge polisher. Good balance of speed and quality. Profile: DuPont. Material: Foliated metamorphic rock. Mohs 3-4. Watch for delamination.
- Conveyor Speed
- 40.7 ipm
- Spindle Count
- 8
Machine Parameters
Tool Sequence
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Comandulli Omega - Caesarstone Quartz - Bevel
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Chiseled / Rock Face
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Cove
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Double Ogee
comandulli
Professional fabricators turn to the Comandulli Omega - Slate - DuPont template for accurate cnc-presets production work. The standard dimensions specifications provide the exact geometry needed for CNC-based fabrication workflows. This DXF template eliminates manual layout work while ensuring every piece meets the tight tolerances required for quality installations. The design works well across multiple stone types and installation scenarios.
Installation Overview
The fabrication process for the Comandulli Omega - Slate - DuPont begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
Optimal CNC settings for the Comandulli Omega - Slate - DuPont template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The dupont profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The Comandulli Omega - Slate - DuPont profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the dupont geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source quartzite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.