Comandulli Omega - Onyx - DuPont
Comandulli Omega
edge_polishing Preset
Processing Parameters
Conveyor Speed
33.3ipm
Spindle Count
8heads
Tool Sequence
50_grit_metal_bond
50 grit metal bond
2,650 RPM
25.5 PSI
100_grit_metal_bond
100 grit metal bond
2,800 RPM
23.8 PSI
200_grit_metal_bond
200 grit metal bond
2,950 RPM
22.1 PSI
400_grit_resin_bond
400 grit resin bond
3,100 RPM
20.4 PSI
800_grit_resin_bond
800 grit resin bond
3,250 RPM
18.7 PSI
1500_grit_resin_bond
1500 grit resin bond
3,400 RPM
17 PSI
3000_grit_resin_bond
3000 grit resin bond
3,550 RPM
15.3 PSI
buff_pad
buff pad
4,100 RPM
13.6 PSI
Notes
Italian 8-spindle edge polisher. Good balance of speed and quality. Profile: DuPont. Material: Very fragile translucent stone. Mesh-backed. Treat like glass.
Description
The Comandulli Omega - Onyx - DuPont is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- comandulli
- Material
- Onyx
- Downloads
- 0
CNC Preset Details
- Machine ID
- comandulli-omega
- Machine Name
- Comandulli Omega
- Material ID
- onyx
- Material Name
- Onyx
- Material Group
- natural_stone
- Preset Type
- edge_polishing
- Priority
- P2
- Post Processor
- none
- Notes
- Italian 8-spindle edge polisher. Good balance of speed and quality. Profile: DuPont. Material: Very fragile translucent stone. Mesh-backed. Treat like glass.
- Conveyor Speed
- 33.3 ipm
- Spindle Count
- 8
Machine Parameters
Tool Sequence
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Comandulli Omega - Caesarstone Quartz - Bevel
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Chiseled / Rock Face
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Cove
comandulli
CNC Preset
Comandulli Omega - Caesarstone Quartz - Double Ogee
comandulli
The Comandulli Omega - Onyx - DuPont is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the Comandulli Omega - Onyx - DuPont begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
For the Comandulli Omega - Onyx - DuPont profile, set your CNC router spindle speed between 5000-7000 RPM for dolomite substrates. Use a feed rate of 40-60 IPM for roughing passes and reduce to 20-30 IPM for finishing passes. Select a diamond-tipped profile bit matching the template radius specifications. Program the toolpath using climb milling for cleaner cuts on the dupont geometry. Maintain coolant flow at 2+ GPM to prevent thermal fracturing. For harder stones like granite, reduce feed rates by 20% and increase water flow. Run a test cut on scrap material to verify the profile matches the DXF template before committing to production stock.
Material Compatibility
The Comandulli Omega - Onyx - DuPont profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the dupont geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source dolomite slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.