Breton T-EDGE - Laminam - Waterfall (Pencil Round)
Breton T-EDGE
edge_polishing Preset
Processing Parameters
Conveyor Speed
23.9ipm
Spindle Count
10heads
Tool Sequence
30_grit_metal_bond
30 grit metal bond
2,650 RPM
34.5 PSI
50_grit_metal_bond
50 grit metal bond
2,800 RPM
32.2 PSI
100_grit_metal_bond
100 grit metal bond
2,950 RPM
29.9 PSI
200_grit_metal_bond
200 grit metal bond
3,100 RPM
27.6 PSI
400_grit_metal_bond
400 grit metal bond
3,250 RPM
25.3 PSI
800_grit_resin_bond
800 grit resin bond
3,400 RPM
23 PSI
1500_grit_resin_bond
1500 grit resin bond
3,550 RPM
20.7 PSI
3000_grit_resin_bond
3000 grit resin bond
3,700 RPM
18.4 PSI
5000_grit_resin_bond
5000 grit resin bond
3,850 RPM
16.1 PSI
buff_pad
buff pad
4,500 RPM
13.8 PSI
Notes
Advanced Breton edge polisher with 10 spindle positions. Profile: Waterfall (Pencil Round). Material: Italian large-format sintered. Thinnest options are very delicate.
Description
The Breton T-EDGE - Laminam - Waterfall (Pencil Round) is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- breton
- Material
- Laminam
- Downloads
- 0
CNC Preset Details
- Machine ID
- breton-t-edge
- Machine Name
- Breton T-EDGE
- Material ID
- laminam
- Material Name
- Laminam
- Material Group
- ultracompact
- Preset Type
- edge_polishing
- Priority
- P2
- Post Processor
- none
- Notes
- Advanced Breton edge polisher with 10 spindle positions. Profile: Waterfall (Pencil Round). Material: Italian large-format sintered. Thinnest options are very delicate.
- Conveyor Speed
- 23.9 ipm
- Spindle Count
- 10
Machine Parameters
Tool Sequence
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Breton AirForce One - Caesarstone Quartz Cutting Preset
breton
CNC Preset
Breton AirForce One - Cambria Quartz Cutting Preset
breton
CNC Preset
Breton AirForce One - Compac Quartz Cutting Preset
breton
CNC Preset
Breton AirForce One - Concrete Cutting Preset
breton
The Breton T-EDGE - Laminam - Waterfall (Pencil Round) is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
The fabrication process for the Breton T-EDGE - Laminam - Waterfall (Pencil Round) begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
CNC programming for the Breton T-EDGE - Laminam - Waterfall (Pencil Round) should account for tool wear compensation, especially on abrasive engineered quartz stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The waterfall geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
The Breton T-EDGE - Laminam - Waterfall (Pencil Round) profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the waterfall geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.