Breton T-EDGE - Florim Magnum - Waterfall (Pencil Round)
Breton T-EDGE
edge_polishing Preset
Processing Parameters
Conveyor Speed
26.3ipm
Spindle Count
10heads
Tool Sequence
30_grit_metal_bond
30 grit metal bond
2,650 RPM
34.5 PSI
50_grit_metal_bond
50 grit metal bond
2,800 RPM
32.2 PSI
100_grit_metal_bond
100 grit metal bond
2,950 RPM
29.9 PSI
200_grit_metal_bond
200 grit metal bond
3,100 RPM
27.6 PSI
400_grit_metal_bond
400 grit metal bond
3,250 RPM
25.3 PSI
800_grit_resin_bond
800 grit resin bond
3,400 RPM
23 PSI
1500_grit_resin_bond
1500 grit resin bond
3,550 RPM
20.7 PSI
3000_grit_resin_bond
3000 grit resin bond
3,700 RPM
18.4 PSI
5000_grit_resin_bond
5000 grit resin bond
3,850 RPM
16.1 PSI
buff_pad
buff pad
4,500 RPM
13.8 PSI
Notes
Advanced Breton edge polisher with 10 spindle positions. Profile: Waterfall (Pencil Round). Material: Italian large-format porcelain. Similar to Sapienstone in cutting characteristics.
Description
The Breton T-EDGE - Florim Magnum - Waterfall (Pencil Round) is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- breton
- Material
- Florim Magnum
- Downloads
- 0
CNC Preset Details
- Machine ID
- breton-t-edge
- Machine Name
- Breton T-EDGE
- Material ID
- florim-magnum
- Material Name
- Florim Magnum
- Material Group
- ultracompact
- Preset Type
- edge_polishing
- Priority
- P2
- Post Processor
- none
- Notes
- Advanced Breton edge polisher with 10 spindle positions. Profile: Waterfall (Pencil Round). Material: Italian large-format porcelain. Similar to Sapienstone in cutting characteristics.
- Conveyor Speed
- 26.3 ipm
- Spindle Count
- 10
Machine Parameters
Tool Sequence
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Breton AirForce One - Caesarstone Quartz Cutting Preset
breton
CNC Preset
Breton AirForce One - Cambria Quartz Cutting Preset
breton
CNC Preset
Breton AirForce One - Compac Quartz Cutting Preset
breton
CNC Preset
Breton AirForce One - Concrete Cutting Preset
breton
The Breton T-EDGE - Florim Magnum - Waterfall (Pencil Round) is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
Installing the Breton T-EDGE - Florim Magnum - Waterfall (Pencil Round) template requires standard stone fabrication procedures adapted for the cnc-presets category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
CNC programming for the Breton T-EDGE - Florim Magnum - Waterfall (Pencil Round) should account for tool wear compensation, especially on abrasive engineered quartz stones. Recommended parameters: spindle speed 4500-6500 RPM, feed rate 35-55 IPM for roughing. The waterfall geometry benefits from a two-pass strategy — rough to within 2mm of final profile, then finish at reduced feed rate (15-25 IPM). Use plunge rates no faster than 10 IPM to prevent tool breakage. Monitor vibration levels during cutting; excessive chatter indicates tool wear or incorrect speed/feed settings. Keep backup tooling on hand for production runs exceeding 50 linear feet of edge profile.
Material Compatibility
This waterfall profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.