Breton GENYA Edge - Sandstone - Half Bullnose
Breton GENYA Edge
edge_polishing Preset
Processing Parameters
Conveyor Speed
34.9ipm
Spindle Count
8heads
Tool Sequence
50_grit_metal_bond
50 grit metal bond
2,650 RPM
30 PSI
100_grit_metal_bond
100 grit metal bond
2,800 RPM
28 PSI
200_grit_metal_bond
200 grit metal bond
2,950 RPM
26 PSI
400_grit_resin_bond
400 grit resin bond
3,100 RPM
24 PSI
800_grit_resin_bond
800 grit resin bond
3,250 RPM
22 PSI
1500_grit_resin_bond
1500 grit resin bond
3,400 RPM
20 PSI
3000_grit_resin_bond
3000 grit resin bond
3,550 RPM
18 PSI
buff_pad
buff pad
4,100 RPM
16 PSI
Notes
Breton edge polisher. Italian precision. 8 spindle positions. Profile: Half Bullnose. Material: Sedimentary quartz grains. Mohs 6-7. Very abrasive and dusty.
Description
The Breton GENYA Edge - Sandstone - Half Bullnose is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Dimensions
Specifications
- Manufacturer
- breton
- Material
- Sandstone
- Downloads
- 0
CNC Preset Details
- Machine ID
- breton-genya-edge
- Machine Name
- Breton GENYA Edge
- Material ID
- sandstone
- Material Name
- Sandstone
- Material Group
- natural_stone
- Preset Type
- edge_polishing
- Priority
- P2
- Post Processor
- none
- Notes
- Breton edge polisher. Italian precision. 8 spindle positions. Profile: Half Bullnose. Material: Sedimentary quartz grains. Mohs 6-7. Very abrasive and dusty.
- Conveyor Speed
- 34.9 ipm
- Spindle Count
- 8
Machine Parameters
Tool Sequence
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
Breton AirForce One - Caesarstone Quartz Cutting Preset
breton
CNC Preset
Breton AirForce One - Cambria Quartz Cutting Preset
breton
CNC Preset
Breton AirForce One - Compac Quartz Cutting Preset
breton
CNC Preset
Breton AirForce One - Concrete Cutting Preset
breton
The Breton GENYA Edge - Sandstone - Half Bullnose is a production-ready DXF template engineered for cnc-presets fabrication projects. At standard dimensions, this template addresses the specific requirements of professional stone fabrication with accurate CNC-ready geometry. Fabricators benefit from standardized dimensions that reduce setup time and improve consistency. This template represents proven configurations used daily in professional fabrication shops.
Installation Overview
Installing the Breton GENYA Edge - Sandstone - Half Bullnose template requires standard stone fabrication procedures adapted for the cnc-presets category. Begin with accurate field measurements to verify the template dimensions match the installation site. Import the DXF file into CNC programming software and create an optimized cutting plan that minimizes material waste. For the cutting phase, select appropriate diamond tooling based on the stone type being fabricated. Maintain consistent coolant flow during all CNC operations to prevent thermal damage. After cutting, perform edge finishing according to the template specifications. Dry-fit all pieces at the installation site before applying adhesive. Use construction-grade silicone or epoxy appropriate for stone installations. Ensure proper support for all sections, adding brackets where overhangs exceed manufacturer recommendations. Apply a penetrating sealer after installation to protect the finished surface. Final inspection should verify all dimensions match the template within acceptable tolerances.
CNC Cutting Notes
Optimal CNC settings for the Breton GENYA Edge - Sandstone - Half Bullnose template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The half-bullnose profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
This half-bullnose profile is compatible with a wide range of countertop materials. Natural granite remains the most popular substrate, offering durability and an attractive polished finish. Engineered quartz performs excellently, with consistent material properties that make CNC cutting predictable and efficient. Marble requires more careful handling — reduce feed rates by 15-20% to prevent veining from causing unpredictable fractures. Quartzite is an excellent choice for this profile, as the material's hardness preserves fine geometric details through years of use. Dolomite and travertine can be profiled with adjusted parameters. Avoid ultra-thin porcelain slabs for complex profiles without proper backing support.
Where to Buy
Professional fabricators can source engineered quartz slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.