AccuGlide - Wilsonart Quartz Cutting Preset
AccuGlide
cutting Preset
Processing Parameters
Notes
Budget-friendly bridge saw for small shops. Material: Wilsonart brand quartz surfaces.
Description
The AccuGlide - Wilsonart Quartz Cutting Preset template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the cnc-presets category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Dimensions
Specifications
- Manufacturer
- accuglide
- Material
- Wilsonart Quartz
- Downloads
- 0
CNC Preset Details
- Machine ID
- accuglide
- Machine Name
- AccuGlide
- Machine Type
- bridge_saw
- Material ID
- wilsonart-quartz
- Material Name
- Wilsonart Quartz
- Material Group
- engineered_quartz
- Preset Type
- cutting
- Priority
- P3
- Post Processor
- generic_gcode
- CNC Controller
- Generic CNC
- Notes
- Budget-friendly bridge saw for small shops. Material: Wilsonart brand quartz surfaces.
Machine Parameters
Export Preset
Export this CNC machine preset as a JSON file you can import into your CAM software.
Free download. No account required.
Related Templates
CNC Preset
AccuGlide - Caesarstone Quartz Cutting Preset
accuglide
CNC Preset
AccuGlide - Cambria Quartz Cutting Preset
accuglide
CNC Preset
AccuGlide - Compac Quartz Cutting Preset
accuglide
CNC Preset
AccuGlide - Concrete Cutting Preset
accuglide
The AccuGlide - Wilsonart Quartz Cutting Preset template delivers precision DXF geometry for professional stone fabrication. With dimensions of standard dimensions, this template provides CNC-ready profiles that ensure consistent, repeatable results. Designed for the cnc-presets category, this template streamlines the fabrication process from initial programming through final finishing. Professional shops rely on accurate templates like this to minimize waste and maximize production efficiency across installations.
Installation Overview
The fabrication process for the AccuGlide - Wilsonart Quartz Cutting Preset begins with DXF template verification and material selection. Import the template geometry into your CAM software, setting appropriate tool paths for the cnc-presets specifications. Select diamond tooling rated for the specific stone material being processed. CNC cutting should proceed in stages: roughing passes followed by finishing passes at full depth. Maintain proper coolant flow throughout all machining operations. After all pieces are cut, perform any required edge finishing or polishing operations. Transport pieces to the installation site using appropriate lifting equipment and A-frame racks. On-site, verify cabinet or substrate preparation meets installation requirements. Apply adhesive in the recommended pattern and set pieces beginning with the largest section. Complete all joints with color-matched epoxy. Allow full cure time before loading the installation with fixtures or appliances. Seal all exposed surfaces with an appropriate stone sealer.
CNC Cutting Notes
Optimal CNC settings for the AccuGlide - Wilsonart Quartz Cutting Preset template depend on the substrate material. For natural granite, use 4000-5500 RPM with 30-50 IPM feed. For quartz composites, increase to 5500-7000 RPM at 45-65 IPM. The accuglide profile requires careful attention to entry and exit points on the toolpath to prevent edge chipping. Program multiple depth passes rather than a single full-depth cut. Coolant temperature should remain below 70°F for optimal diamond tool performance. Dress profiling wheels after every 20-30 linear feet of cutting to maintain profile accuracy.
Material Compatibility
The AccuGlide - Wilsonart Quartz Cutting Preset profile pairs best with medium-to-hard natural stones and engineered materials. Granite is the ideal substrate, offering the hardness needed to maintain the accuglide geometry while accepting a brilliant polish. Quartz composites provide consistent results with minimal tool wear variation. For softer stones like marble or limestone, the profile remains achievable but requires adjusted CNC parameters and additional care during finishing. Exotic stones such as quartzite and super-white dolomite produce stunning results with this profile. Sintered stone panels are compatible when using specialized thin-material tooling. Always perform a test cut on representative material before beginning production runs.
Where to Buy
Professional fabricators can source marble slabs from local stone distributors and wholesale suppliers. Visit SlabWise for template downloads and fabrication resources.