Description
The 45-degree angled backsplash template at 24-inch width is specifically designed for compact corner installations and tight spatial constraints common in galley kitchens, bar areas, and smaller residential spaces. This professional-grade DXF template provides precise cutting specifications for creating corner backsplash pieces that transition at the most common non-standard wall angle encountered in residential and commercial construction. The 45-degree configuration is particularly valuable when walls meet at 135-degree angles, a frequent occurrence in octagonal rooms, bay window areas, and modern open-concept designs where angled walls create visual interest. The 24-inch width makes this template ideal for narrower countertop sections, peninsula ends, or situations where material optimization is critical. Fabricators appreciate the reduced material waste compared to wider templates when working with remnant pieces or expensive exotic stone varieties.
Dimensions
- Overall Width
- 24"
Specifications
- Downloads
- 0
Related Templates
The 45-degree angled backsplash template at 24-inch width is specifically designed for compact corner installations and tight spatial constraints common in galley kitchens, bar areas, and smaller residential spaces. This professional-grade DXF template provides precise cutting specifications for creating corner backsplash pieces that transition at the most common non-standard wall angle encountered in residential and commercial construction. The 45-degree configuration is particularly valuable when walls meet at 135-degree angles, a frequent occurrence in octagonal rooms, bay window areas, and modern open-concept designs where angled walls create visual interest. The 24-inch width makes this template ideal for narrower countertop sections, peninsula ends, or situations where material optimization is critical. Fabricators appreciate the reduced material waste compared to wider templates when working with remnant pieces or expensive exotic stone varieties.
Installation Overview
Proper installation begins with accurate field measurement of the actual wall angle using a digital protractor or angle finder. For 45-degree corners, measure at three points vertically to ensure wall consistency before cutting. The 24-inch width typically provides 1-2 inches of overhang beyond standard 22-inch deep countertops, allowing for final field trimming. Pre-fit the cut piece before applying adhesive to verify angle accuracy and make micro-adjustments if necessary. Use shims behind the backsplash to maintain consistent spacing from the wall surface if the wall has irregularities. Apply a continuous bead of color-matched silicone along the countertop joint before setting the backsplash in place.
CNC Cutting Notes
Import this DXF file into your CNC control software and verify scale accuracy before toolpath generation. For the 45-degree angled section, use a spiral upcut bit to minimize top surface chipping, especially important for polished granite and quartz materials. Program tool compensation based on your specific bit diameter, adding 0.05-0.10mm for engineered materials that may have harder resin content. The 24-inch width allows for efficient nesting on standard 55-inch or 63-inch slab widths. Set plunge rates to 50-70% of your standard cutting speed at the angle transition to prevent corner breakout. Enable corner rounding with a 2mm radius at sharp transitions to reduce stress concentration.
Material Compatibility
This template works exceptionally well with all natural stone materials including granite, marble, soapstone, and quartzite, as well as engineered surfaces like quartz composites. The 6-inch height provides adequate strength even in more brittle materials like marble when cut at 2cm thickness. The 45-degree angle distributes stress more evenly than sharper angles, making it suitable for materials with visible veining or natural fissures. Works with both standard 2cm and 3cm material thicknesses. For ultra-compact surfaces like Dekton or Neolith, standard cutting parameters apply without modification.
Where to Buy
Download this professional DXF template instantly from Slabwise. The template includes full dimensional accuracy verified for commercial stone fabrication and is compatible with all major CNC systems, waterjet cutters, and CAM software platforms used in the countertop industry.