Description
This dual-cutout template is designed for kitchen and bathroom backsplashes where both electrical outlets and light switches need to be integrated into the stone surface. The 8-inch tall by 96-inch wide template features side-by-side cutouts positioned to accommodate standard two-gang electrical boxes, which house one duplex outlet and one single-pole light switch in adjacent positions. The side-by-side configuration is extremely common in kitchen designs where counter outlets are paired with switches for garbage disposals, under-cabinet lighting, or pendant fixtures. This template ensures precise alignment of both cutouts with proper spacing to match standard electrical box dimensions. By using this pre-designed template, fabricators eliminate measurement errors and achieve professional results that meet electrical code requirements while maintaining the visual appeal of continuous stone surfaces.
Dimensions
- Overall Width
- 96"
Specifications
- Downloads
- 0
Related Templates
This dual-cutout template is designed for kitchen and bathroom backsplashes where both electrical outlets and light switches need to be integrated into the stone surface. The 8-inch tall by 96-inch wide template features side-by-side cutouts positioned to accommodate standard two-gang electrical boxes, which house one duplex outlet and one single-pole light switch in adjacent positions. The side-by-side configuration is extremely common in kitchen designs where counter outlets are paired with switches for garbage disposals, under-cabinet lighting, or pendant fixtures. This template ensures precise alignment of both cutouts with proper spacing to match standard electrical box dimensions. By using this pre-designed template, fabricators eliminate measurement errors and achieve professional results that meet electrical code requirements while maintaining the visual appeal of continuous stone surfaces.
Installation Overview
Verify the electrical box configuration before beginning fabrication - the template is designed for standard two-gang boxes measuring approximately 4 inches wide by 3.5 inches tall. Position the template on your stone slab to optimize material usage and ensure grain pattern continuity across the backsplash. Import the DXF file into your CNC control software and confirm that both cutouts align properly with your shop's coordinate system. The side-by-side positioning maintains a standard center-to-center spacing of 1.5 inches between outlet and switch, matching the typical two-gang box layout. After CNC cutting, perform a test fit with the actual electrical box to verify alignment and clearances. The dual openings should allow the electrical devices to sit flush with the stone surface when properly installed with cover plates.
CNC Cutting Notes
Program your CNC to cut both rectangular openings using identical toolpaths offset horizontally by the standard gang spacing. Use a plunge-and-ramp cutting strategy for the rectangular pockets, maintaining perpendicular walls for proper electrical box fit. Tool selection should be based on material type - use 6mm or 8mm diameter bits for detailed corner work, ensuring sharp internal corners that match electrical box profiles. Set your depth of cut to penetrate completely through the stone thickness plus an additional 2-3mm for clearance. Feed rates between 85-115 inches per minute work well for most materials, with slower speeds recommended for brittle stones. The narrow bridge of material between the two cutouts requires special attention - reduce feed rate by 20-30 percent when cutting this area to prevent chipping or cracking. Ensure adequate coolant flow across both cutting zones.
Material Compatibility
This template works with all standard countertop materials including granite, engineered quartz, marble, and quartzite. The side-by-side cutout pattern is most successful with 3cm (1.25-inch) thick slabs, which provide adequate strength in the area between the two openings. For thinner 2cm materials or brittle stones, consider requesting that the electrician use reinforced electrical boxes or plan for additional backing support during installation. Engineered quartz handles the dual cutout extremely well due to its homogeneous composition and high flexural strength. When working with natural stone, orient the template to avoid major veins or fissures running between the two cutouts, as these could create weak points. The 8-inch backsplash height provides ample material above and below the electrical openings for structural stability.
Where to Buy
This DXF template is available for instant download through the Slabwise platform. The digital file format is universally compatible with CNC systems from all major manufacturers including Intermac, Park Industries, GMM, Breton, and Northwood. Your purchase includes both imperial (inches) and metric (millimeters) versions of the template for international compatibility. The template is fully editable in any CAD software, allowing you to adjust the position of cutouts or modify spacing to accommodate non-standard electrical box configurations. Lifetime access is included with your purchase, and you'll receive free updates if the template is revised for improved functionality or code compliance.