Backsplash 8" x 96" with Outlet + Light Switch
Description
This premium extended-width backsplash template provides precision geometry for a 96-inch wide by 8-inch tall stone backsplash featuring two electrical cutouts: one standard outlet and one light switch. The 96-inch width allows fabricators to cover extended counter sections with a single seamless piece.
Dimensions
- Overall Width
- 96"
Specifications
- Downloads
- 0
Related Templates
Answer summary
What is the Backsplash 8" x 96" with Outlet + Light Switch DXF template for?
Backsplash 8" x 96" with Outlet + Light Switch is a backsplash templates DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Backsplash 8" x 96" with Outlet + Light Switch DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Backsplash 8" x 96" with Outlet + Light Switch is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Backsplash 8" x 96" with Outlet + Light Switch
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Backsplash 8" x 96" with Outlet + Light Switch is filed under Backsplash Templates. The normalized record lists width 96", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Backsplash Templates files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Backsplash 12" x 108" Standard, Backsplash 12" x 120" Standard, Backsplash 12" x 24" Standard to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
This premium extended-width backsplash template provides precision geometry for a 96-inch wide by 8-inch tall stone backsplash featuring two electrical cutouts: one standard outlet and one light switch. The 96-inch width allows fabricators to cover extended counter sections with a single seamless piece.
Installation Overview
Installing 96-inch sections with combination outlet and switch cutouts requires professional execution. Verify both box locations. The extended length demands proper handling equipment. Execute perimeter cuts first, then both openings. Apply edge finishing. Verify both cutouts align before adhesive cures.
CNC Cutting Notes
Verify CNC bed accommodates 96-inch length. Both cutouts typically use single-gang dimensions. Use 1/4" or 3/8" router bits. Set feed rates at 80-100 IPM for perimeter, 60-80 IPM for cutouts. Run simulation.
Material Compatibility
Best suited for harder materials including granite and engineered quartz. Requires large slab stock. Choose slabs with minimal internal flaws.
Where to Buy
Download instantly from Slabwise. Compatible with major CNC systems including Intermac, Park Industries, GMM, Breton, Prussiani.