Description
This professional backsplash template delivers precise fabrication specifications for an 8-inch tall by 72-inch wide stone backsplash featuring two outlet cutouts strategically positioned at both ends. This dual-outlet configuration is ideal for longer counter runs, kitchen islands, and work zones where electrical access is needed at multiple locations along the counter length. By positioning outlets at the far ends rather than centrally, this template maximizes uninterrupted surface area in the middle section of the backsplash, perfect for showcasing dramatic stone patterns or maintaining clean visual lines in contemporary kitchen designs. The end-positioned outlet layout serves specific functional needs: powering appliances at opposite ends of a counter, providing electrical service for both prep and cleanup zones, or meeting electrical code requirements for outlet spacing on long counter runs. The 72-inch length accommodates standard wall cabinet widths and provides adequate spacing between the two outlet locations. This template works with all natural and engineered stone materials including granite, quartz, marble, quartzite, and porcelain slabs, ensuring proper integration of dual electrical boxes while maintaining structural integrity throughout the backsplash length.
Dimensions
- Overall Width
- 72"
Specifications
- Downloads
- 0
Related Templates
This professional backsplash template delivers precise fabrication specifications for an 8-inch tall by 72-inch wide stone backsplash featuring two outlet cutouts strategically positioned at both ends. This dual-outlet configuration is ideal for longer counter runs, kitchen islands, and work zones where electrical access is needed at multiple locations along the counter length. By positioning outlets at the far ends rather than centrally, this template maximizes uninterrupted surface area in the middle section of the backsplash, perfect for showcasing dramatic stone patterns or maintaining clean visual lines in contemporary kitchen designs. The end-positioned outlet layout serves specific functional needs: powering appliances at opposite ends of a counter, providing electrical service for both prep and cleanup zones, or meeting electrical code requirements for outlet spacing on long counter runs. The 72-inch length accommodates standard wall cabinet widths and provides adequate spacing between the two outlet locations. This template works with all natural and engineered stone materials including granite, quartz, marble, quartzite, and porcelain slabs, ensuring proper integration of dual electrical boxes while maintaining structural integrity throughout the backsplash length.
Installation Overview
Installation of this dual-outlet backsplash requires careful coordination with your electrical contractor to ensure both outlet boxes are properly positioned and aligned. Using the DXF template, mark both outlet locations on your stone slab, verifying that each cutout measures approximately 2.75 inches wide by 4.5 inches tall for standard single-gang electrical boxes. The end positioning means both outlets sit near the backsplash edges, requiring attention to edge distance to maintain structural integrity—most fabricators maintain at least 3-4 inches from cutout edge to backsplash end. Verify all measurements against actual electrical box positions before cutting, as field conditions may require minor adjustments. Position both boxes at consistent heights above the countertop surface, typically 4-6 inches, to maintain visual balance and meet NEC requirements.
CNC Cutting Notes
CNC programming for this dual-outlet template requires accurate positioning of two rectangular cutouts near opposite ends of the 72-inch length. Use a 10mm or 12mm diamond router bit for both outlet openings, programming each with multiple depth passes to prevent thermal stress. Each rectangular cutout requires 3-5mm corner radii to prevent stress concentration while maintaining tight tolerances for electrical box fit. Set feed rates between 800-1200mm/min depending on material hardness, ensuring consistent cutting parameters for both outlets. The end positioning of cutouts requires careful attention to edge distances during nesting—verify adequate material exists beyond each cutout to prevent edge breakage during cutting or handling. Program the two cutouts with identical geometry for consistency in electrical device installation.
Material Compatibility
This template is compatible with all countertop stone materials including granite, marble, quartzite, soapstone, engineered quartz, and porcelain slabs. The 8-inch height works with both 2cm and 3cm material thicknesses. The dual-outlet configuration creates two potential stress areas, making proper material selection important for fragile stones. The end-positioned layout actually reduces stress compared to centrally-located dual outlets, as the outlets avoid competing stress fields. For softer materials like marble or certain limestones, consider mesh backing or epoxy reinforcement near both cutout areas. The 72-inch length allows efficient nesting on standard slab sizes with appropriate waste management.
Where to Buy
This dual-outlet backsplash template with end positioning is available for immediate download from Slabwise, providing instant access for fabrication shops. The DXF format ensures compatibility with all major CNC programming software and CAD systems.