Description
This professional-grade backsplash template provides precise specifications for fabricating a 8-inch tall by 144-inch wide backsplash with a pre-positioned standard duplex electrical outlet cutout. The 144-inch width makes this template ideal for standard countertop sections, extended kitchen runs, and commercial installations where standard duplex electrical outlet integration is required. The standard duplex electrical outlet configuration provides reliable power access for kitchen counters, bathroom vanities, and work zones. This template ensures accurate outlet placement and proper clearances for safe electrical integration while maintaining the structural integrity of your stone, quartz, or granite backsplash.
Dimensions
- Overall Width
- 144"
Specifications
- Downloads
- 0
Related Templates
This professional-grade backsplash template provides precise specifications for fabricating a 8-inch tall by 144-inch wide backsplash with a pre-positioned standard duplex electrical outlet cutout. The 144-inch width makes this template ideal for standard countertop sections, extended kitchen runs, and commercial installations where standard duplex electrical outlet integration is required. The standard duplex electrical outlet configuration provides reliable power access for kitchen counters, bathroom vanities, and work zones. This template ensures accurate outlet placement and proper clearances for safe electrical integration while maintaining the structural integrity of your stone, quartz, or granite backsplash.
Installation Overview
Begin by verifying wall levelness across the entire 144-inch span and marking the electrical boxes centerline on the wall surface. Confirm electrical box depth provides adequate clearance for stone thickness plus adhesive (minimum 2-1/2 inch deep boxes for 2cm stone). Due to the extended length, this installation typically requires two installers to safely handle and position the backsplash. Clean the installation surface thoroughly and apply construction adhesive or thin-set mortar in a continuous bead pattern, avoiding areas directly behind the outlet cutout. Position the backsplash carefully, aligning the cutout with the electrical box, and press firmly into place. Use a level to verify horizontal and vertical alignment. Support the center section during curing to prevent sagging. Allow adhesive to cure for 24-48 hours before outlet installation and final caulking.
CNC Cutting Notes
Program your CNC router or waterjet system with appropriate feed rates for the material thickness, typically 2cm or 3cm stone slabs. The outlet requires precise rectangular toolpath dimensions of approximately 1.312 inches wide by 2.937 inches tall with 1/8-inch corner radii. Use a 1/8-inch or 3/16-inch diameter carbide end mill for outlet cutting operations to achieve proper corner geometry. Due to the 144-inch length, secure the material with adequate vacuum zones or mechanical clamps spaced every 24-36 inches to prevent material shift during the extended cutting cycle. Consider bridge cutting techniques for long-span operations. Set conservative feed rates (60-120 inches per minute) for outlet cutout operations to prevent chipping, especially in brittle materials. For waterjet cutting, adjust garnet flow and pressure near corners to minimize taper effects. Always perform a dry run to verify toolpath accuracy and test-fit outlet dimensions before live cutting on production materials.
Material Compatibility
This template is compatible with all standard countertop materials including granite, marble, quartzite, quartz composites (Caesarstone, Silestone, Cambria), soapstone, solid surface materials, and large-format porcelain slabs. The 144-inch length exceeds most standard slab sizes (typically 120-130 inches maximum), requiring field seaming for natural stone applications. Large-format porcelain panels (up to 160 inches) may accommodate the full length without seaming. Recommended thickness is 2cm (3/4 inch) for residential applications, providing optimal weight-to-strength ratio. Commercial installations or high-traffic areas may specify 3cm (1-1/4 inch) material, which requires reinforced wall mounting and deeper electrical boxes. Adjust cutting parameters for material hardness: harder materials like quartzite require slower feed rates and more frequent bit changes. Brittle materials such as marble may benefit from epoxy backing reinforcement around outlet cutout areas.
Where to Buy
Download this professional DXF template instantly from Slabwise for immediate use with all major CNC fabrication equipment including Intermac, Park Industries, GMM, Prussiani, and Braxton systems. Also compatible with manual template routing and bridge saw operations for smaller fabrication shops.