Description
Standard 6" tall by 72" wide backsplash template for stone countertop fabrication. Ready-to-use DXF file.
Dimensions
- Overall Width
- 72"
Specifications
- Downloads
- 0
Related Templates
The 6-inch by 72-inch standard backsplash represents the most common dimension for residential kitchen countertop installations, perfectly suited for standard six-foot counter runs and providing optimal coverage behind cooktops, sinks, and preparation areas. This precision-engineered DXF template delivers a clean, straight backsplash profile without outlet cutouts or special features, making it ideal for continuous runs where electrical access is provided elsewhere or for sections of counter where no outlets are needed. The 6-inch height follows industry standards for residential applications, offering effective splash protection while maintaining visual proportion. The 72-inch length accommodates standard countertop layouts with room for end finishing and scribing adjustments. Professional fabricators will find this template essential for high-volume production, as it represents the foundation configuration used in countless kitchen installations.
Installation Overview
This standard backsplash template is designed for straightforward installation on countertops ranging from 66 to 72 inches in finished length, accommodating typical six-foot cabinet runs. The 6-inch height specification provides adequate coverage behind most kitchen work areas while allowing clearance for under-cabinet fixtures, electrical outlets positioned above the backsplash, and wall-mounted accessories. Installation begins with thorough cleaning of both the countertop surface and wall. Check the wall for plumb using a level - walls out of plumb by more than 1/4 inch may require scribing the back edge of the backsplash to match the wall contour. Apply construction adhesive in a serpentine pattern on the back surface of the backsplash, positioned to contact both the wall and the countertop. Carefully position the backsplash, pressing firmly against the wall while ensuring the bottom edge seats completely on the countertop surface. Use painter's tape or temporary wooden supports to hold the backsplash vertical and tight against the wall until the adhesive fully cures, typically 24 hours. After curing, remove supports and apply a thin bead of color-matched caulk along the wall joint and countertop joint for a waterproof seal.
CNC Cutting Notes
Programming this standard backsplash involves only a simple rectangular perimeter cut. Use a 3/8-inch or 1/2-inch router bit for the 72-inch by 6-inch rectangle. Feed rates of 100-120 IPM work well for most materials. Use climb cutting for clean edges and adequate water flow to prevent heat buildup. For waterjet, use 60,000 PSI with 80-mesh garnet at 0.8-1.2 lbs/min. Cutting speeds: 4-6 IPM for granite/quartzite, 6-10 IPM for marble/quartz. Add tabs every 18-24 inches to prevent movement during cutting. The top edge typically receives a pencil edge or eased edge profile post-cutting.
Material Compatibility
This standard template is universally compatible with all countertop materials commonly used in residential and commercial applications. Granite slabs in both 3cm and 2cm thickness cut cleanly and efficiently with this template, producing durable backsplashes with excellent longevity. The long, straight cuts characteristic of backsplash fabrication work well with granite's natural grain patterns. Quartz engineered stone is ideal for backsplash applications, offering consistent thickness, minimal waste, and superior edge quality compared to natural stone. The 72-inch length fits efficiently on standard quartz slab dimensions. Marble and softer natural stones produce beautiful backsplashes, though slightly reduced cutting speeds help prevent edge chipping. The simple rectangular geometry of this template minimizes stress points that could cause issues in softer materials. Quartzite demands diamond or carbide tooling but delivers exceptional durability and scratch resistance for backsplash applications. Solid surface materials like Corian cut quickly with this template but require attention to prevent melting from heat during cutting. Porcelain slabs in large format work well with waterjet cutting methods. The standard 6-inch height is suitable for materials ranging from 2cm (3/4 inch) to 3cm (1-1/4 inch) thickness, with 3cm being most common for residential installations.
Where to Buy
This professional-grade DXF template is available for immediate download from the Slabwise template library, providing instant access to fabrication-ready CAD files compatible with any CNC or waterjet system. The template integrates seamlessly with all major fabrication software including Alphacam, Mastercam, RhinoCAM, VCarve Pro, and universal CAD/CAM platforms. Waterjet operators can import directly into Flow, OMAX, and Jet Edge control systems. For stone material sourcing, contact leading distributors including MSI (Marble Systems Inc.), Daltile, Arizona Tile, Bedrosians, or local stone yards who can provide slabs in dimensions suitable for 72-inch backsplash fabrication. Most distributors offer remnant programs where smaller pieces perfect for backsplash fabrication are available at reduced prices. When ordering slabs specifically for backsplashes, verify that dimensions accommodate your required length plus a few inches for edge finishing. Professional fabrication shops will use this template more than any other backsplash configuration due to its universal applicability and the frequency of six-foot counter runs in residential construction.