Backsplash 6" x 120" Standard
Description
This clean, professional DXF template provides the foundation for fabricating seamless 6-inch tall by 120-inch wide stone backsplashes without electrical outlet cutouts. Designed for modern kitchen installations where outlets are positioned elsewhere or incorporated into pop-up outlet systems, this template allows fabricators to create uninterrupted stone surfaces that showcase the natural beauty and pattern continuity of premium stone materials. The 120-inch length is particularly well-suited for long kitchen wall runs, island applications, or commercial installations requiring extended backsplash coverage. By eliminating outlet cutouts, this template maximizes material yield and reduces cutting complexity while creating a sleek, minimalist aesthetic that emphasizes the stone's inherent characteristics.
Dimensions
- Overall Width
- 120"
Specifications
- Downloads
- 0
Related Templates
Answer summary
What is the Backsplash 6" x 120" Standard DXF template for?
Backsplash 6" x 120" Standard is a backsplash templates DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Backsplash 6" x 120" Standard DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Backsplash 6" x 120" Standard is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Backsplash 6" x 120" Standard
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Backsplash 6" x 120" Standard is filed under Backsplash Templates. The normalized record lists width 120", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Backsplash Templates files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Backsplash 12" x 108" Standard, Backsplash 12" x 120" Standard, Backsplash 12" x 24" Standard to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
This clean, professional DXF template provides the foundation for fabricating seamless 6-inch tall by 120-inch wide stone backsplashes without electrical outlet cutouts. Designed for modern kitchen installations where outlets are positioned elsewhere or incorporated into pop-up outlet systems, this template allows fabricators to create uninterrupted stone surfaces that showcase the natural beauty and pattern continuity of premium stone materials. The 120-inch length is particularly well-suited for long kitchen wall runs, island applications, or commercial installations requiring extended backsplash coverage. By eliminating outlet cutouts, this template maximizes material yield and reduces cutting complexity while creating a sleek, minimalist aesthetic that emphasizes the stone's inherent characteristics.
Installation Overview
Installation begins with comprehensive site measurement to verify that the 120-inch length matches the intended space and that no electrical outlets will interfere with the backsplash placement. Clean and level the wall surface, removing any old backsplash material, adhesive residue, or wallboard irregularities that could prevent proper adhesion. Load the DXF template into your CNC controller or bridge saw software, confirming all dimensions are accurate before cutting. Select appropriate cutting speeds and tooling based on your specific stone type, using diamond blades or CNC bits designed for the material hardness. After cutting, inspect all edges for chips or irregularities, addressing any issues before installation.
CNC Cutting Notes
Programming this straightforward rectangular template for CNC cutting requires attention to toolpath efficiency and material support over the long 120-inch span. Use a single-pass perimeter cutting strategy with appropriate tool diameter compensation to produce accurate finished dimensions. A 10-12mm diameter diamond bit works well for most applications, balancing cutting speed with edge quality. Program your lead-in and lead-out positions at a back corner to minimize visible tool marks on edges that will be exposed after installation. For the long edges parallel to the 120-inch dimension, maintain consistent feed rates between 100-150 inches per minute for granite and 120-180 inches per minute for quartz, adjusting based on material hardness and finish quality requirements.
Material Compatibility
This template accommodates the full range of natural and engineered stone materials used in contemporary countertop fabrication. Granite remains a popular choice for backsplashes, offering exceptional durability, heat resistance, and unique natural patterning that becomes particularly dramatic across the 120-inch uninterrupted surface. Engineered quartz provides consistent coloring and pattern repeatability, making it easier to match with quartz countertops while offering superior stain resistance and lower maintenance requirements. Marble creates stunning visual impact with its distinctive veining, especially when the 120-inch length allows for book-matched or sequentially cut slabs that display mirror-image patterns. Quartzite combines natural beauty with durability exceeding most granites, though its hardness requires appropriate cutting speeds and tooling.
Where to Buy
Access this professional DXF template through immediate digital download from the Slabwise template library, which provides fabrication shops with instant availability for urgent projects without shipping delays or inventory management. The digital format allows unlimited reuse across multiple projects, making it cost-effective for shops regularly fabricating standard-size backsplashes. Stone fabrication industry suppliers often include this template in comprehensive backsplash collections sold through their online catalogs or distributed at trade shows and regional industry events.