Backsplash 6" x 108" with Two Outlets at Ends
Description
This 6-inch tall by 108-inch wide backsplash template is engineered with two outlet cutouts strategically positioned near each end of the backsplash. This configuration is ideal for longer countertop runs where electrical access is needed at multiple locations, such as kitchen islands, extended prep areas, or workstations that span significant linear footage. The 9-foot length with end-positioned outlets provides flexibility for connecting multiple small appliances, charging stations, or task lighting without overcrowding the middle section of the backsplash. The 6-inch height delivers superior wall protection in high-use areas while maintaining clean sightlines and modern proportions. This dual-outlet design is particularly valuable in modern kitchen layouts where power accessibility at multiple points enhances functionality and user convenience. Professional fabricators appreciate this template for its practical approach to electrical integration in contemporary residential and light commercial spaces.
Dimensions
- Overall Width
- 108"
Specifications
- Downloads
- 0
Related Templates
Answer summary
What is the Backsplash 6" x 108" with Two Outlets at Ends DXF template for?
Backsplash 6" x 108" with Two Outlets at Ends is a backsplash templates DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Backsplash 6" x 108" with Two Outlets at Ends DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Backsplash 6" x 108" with Two Outlets at Ends is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Backsplash 6" x 108" with Two Outlets at Ends
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Backsplash 6" x 108" with Two Outlets at Ends is filed under Backsplash Templates. The normalized record lists width 108", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Backsplash Templates files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Backsplash 12" x 108" Standard, Backsplash 12" x 120" Standard, Backsplash 12" x 24" Standard to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
This 6-inch tall by 108-inch wide backsplash template is engineered with two outlet cutouts strategically positioned near each end of the backsplash. This configuration is ideal for longer countertop runs where electrical access is needed at multiple locations, such as kitchen islands, extended prep areas, or workstations that span significant linear footage. The 9-foot length with end-positioned outlets provides flexibility for connecting multiple small appliances, charging stations, or task lighting without overcrowding the middle section of the backsplash. The 6-inch height delivers superior wall protection in high-use areas while maintaining clean sightlines and modern proportions. This dual-outlet design is particularly valuable in modern kitchen layouts where power accessibility at multiple points enhances functionality and user convenience. Professional fabricators appreciate this template for its practical approach to electrical integration in contemporary residential and light commercial spaces.
Installation Overview
Careful field measurement is critical for this dual-outlet template. Before fabricating, locate and measure both outlet positions relative to fixed reference points like countertop ends or appliance locations. Verify that the template's outlet spacing matches your electrical rough-in dimensions. Transfer measurements to the stone, accounting for any field variations. During installation, dry-fit the backsplash first to confirm both outlet alignments simultaneously—correcting alignment issues is much easier before adhesive application. Clean the wall surface and apply construction adhesive, avoiding areas around both outlet cutouts. Position the backsplash carefully, threading both outlets through their respective cutouts. Use a level across the full length to ensure proper alignment, adjusting as needed before the adhesive begins to set. Install both outlet receptacles, ensuring they sit flush with the stone surface. After curing, apply silicone caulk around the perimeter and both outlet cutouts for complete waterproofing.
CNC Cutting Notes
Program your CNC to cut the perimeter and both outlet cutouts in a single continuous operation for maximum efficiency and accuracy. Ensure your CNC bed and material are properly secured for the full 108-inch length to prevent movement during cutting. Use consistent feed rates throughout the operation—typically 80-120 inches per minute for granite and quartz materials. The outlet cutouts at the ends require precise positioning, so verify your origin point and dimensional layout before starting the cut cycle. Use a quality 6mm or quarter-inch carbide end mill for clean cutout edges and sharp corners. Apply adequate coolant throughout the operation, particularly during cutout operations where chips can accumulate. For dual cutouts, program efficient tool paths that minimize non-cutting travel time between operations. If cutting manually, use a template or precise layout to ensure both cutouts are positioned accurately and at the same height from the bottom edge.
Material Compatibility
This template works with all common countertop stone materials including granite, engineered quartz, marble, quartzite, and soapstone. The 6-inch height optimizes material use from standard slab widths while accommodating the dual outlet configuration. When selecting veined or patterned materials like marble, consider how the vein flow will interact with the two outlet cutouts—symmetrical vein patterns can create visual balance, while dramatic veining might be interrupted by the cutouts. Engineered quartz provides the most predictable results for dual-cutout fabrication due to its uniform density and composition. Harder materials like quartzite require careful tooling selection and feed rate management to prevent chipping around cutout edges. For highly figured or bookmatched materials, plan the outlet positions to complement rather than disrupt the stone's natural patterns.
Where to Buy
Access this professional DXF template through the Slabwise template library for immediate download and use with your CNC stone fabrication equipment. The template format is universally compatible with major CNC control systems including BACA, Intermac, Park Industries, Northwood, and others. Import the DXF file directly into your CAM software for automated or semi-automated cutting operations. Fabrication shops without CNC capabilities can output the template at full scale for use as a manual cutting pattern. Source your stone material from the same slab used for the associated countertop to ensure perfect color and pattern continuity. Most stone distributors stock appropriate 2cm material for backsplash applications, or work with specialized fabrication service providers who can cut to your specifications using this template as a reference.