Stair Tread - Anti-Slip Grooved - 60" - 2cm
Description
Download free anti-slip grooved stair tread DXF template, 60" long, 2cm thick. Includes nosing profile cross-section.
Dimensions
- Overall Depth
- 12"
Specifications
- Downloads
- 0
Related Templates
Stair Tread - Anti-Slip Grooved - 36" - 2cm+2cm Laminated
Stair Tread - Anti-Slip Grooved - 36" - 2cm
Stair Tread - Anti-Slip Grooved - 36" - 3cm
Stair Tread - Anti-Slip Grooved - 42" - 2cm+2cm Laminated
Answer summary
What is the Stair Tread - Anti-Slip Grooved - 60" - 2cm DXF template for?
Stair Tread - Anti-Slip Grooved - 60" - 2cm is a architectural stone DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Stair Tread - Anti-Slip Grooved - 60" - 2cm DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Stair Tread - Anti-Slip Grooved - 60" - 2cm is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Stair Tread - Anti-Slip Grooved - 60" - 2cm
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Stair Tread - Anti-Slip Grooved - 60" - 2cm is filed under Architectural Stone. The normalized record lists depth 12", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Architectural Stone files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Stair Tread - Anti-Slip Grooved - 36" - 2cm+2cm Laminated, Stair Tread - Anti-Slip Grooved - 36" - 2cm, Stair Tread - Anti-Slip Grooved - 36" - 3cm to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
This 60-inch 2cm anti-slip stair tread template addresses the unique challenge of creating extra-wide stair treads in weight-sensitive applications. The 0.787-inch thickness significantly reduces structural load compared to thicker alternatives, making it viable for renovation projects, second-floor installations, and buildings where existing structural capacity limits the weight of stone elements. Despite the thin profile, this template maintains essential safety features including properly proportioned anti-slip grooves and the standard 1-inch nosing overhang required by most building codes. The 60-inch width is ideal for grand residential staircases and commercial applications where architectural presence is important but structural limitations prevent the use of heavier 3cm material. Fabricators working with modern engineered quartz materials will find this template particularly valuable, as contemporary quartz formulations are specifically engineered to perform in thin formats while delivering the strength needed for wide-span applications. The template is also suitable for select natural stones where careful material selection can yield beautiful, safe treads at reduced thickness.
Installation Overview
Installing 60-inch 2cm treads demands exceptional substrate preparation and installation precision. The thin profile combined with wide span means any substrate irregularity will be amplified, potentially causing stress concentrations and cracking. Substrates must be engineered flat within 1/16" across the full 60-inch width and provide continuous support. Use premium adhesives specifically formulated for large-format thin stone applications. Full-coverage adhesive application is mandatory - never spot-bond wide thin treads. The 60-inch span typically requires supplementary mechanical support beyond adhesive alone; consult building codes and engineering requirements. Consider installing temporary support posts during the extended curing period. Professional installation equipment including large-format suction lifters is essential for safe handling.
CNC Cutting Notes
Cutting 2cm material at 60-inch length requires careful CNC programming and setup. Ensure your machine bed provides uniform support and vacuum distribution across the entire length to prevent flexing during cutting. Any flex during fabrication can induce micro-cracks that will fail under load. Anti-slip grooves in 2cm material should be limited to 1/16" to 1/8" maximum depth to preserve structural integrity across the wide span. Use sharp, smaller-diameter tooling with multiple light passes rather than aggressive cuts. Program reduced feed rates for the nosing profile to ensure smooth finish on this critical edge. Consider fabricating test pieces to verify your programmed groove depth provides adequate slip resistance without compromising strength.
Material Compatibility
Engineered quartz is the optimal material choice for this 60-inch 2cm template. Modern quartz is specifically formulated for thin-format applications and provides consistent structural properties across large dimensions. The homogeneous composition eliminates concerns about grain direction or natural fissures that can be problematic in thin natural stone. If using natural stone, select only fine-grained granite varieties with proven performance in thin applications. Avoid marble, quartzite, or any stone with prominent veining, natural fissures, or directional grain structure at 2cm thickness over 60-inch spans. Material selection is critical for safety and long-term performance - consult with material suppliers about suitability for this specific application.
Where to Buy
Download this specialized extra-wide 2cm stair tread template from Slabwise for instant access to professional DXF files. Compatible with all major stone fabrication CAD and CNC systems. One-time purchase grants unlimited usage rights. Ideal for renovation specialists, commercial installers working with weight restrictions, and fabricators focused on engineered quartz installations.