Shower Pan - Linear Drain Center 30" - 36x36
Description
Download free linear drain center 30" shower pan DXF template, 36x36 size. Stone shower floor with drain channel routing.
Dimensions
- Overall Width
- 36"
- Overall Depth
- 36"
Specifications
- Downloads
- 0
Related Templates
Shower Pan - Linear Drain ADA Back 30" - 36x36
Shower Pan - Linear Drain ADA Back 30" - 48x36
Shower Pan - Linear Drain Back Wall 24" - 36x36
Shower Pan - Linear Drain Back Wall 24" - 48x36
Answer summary
What is the Shower Pan - Linear Drain Center 30" - 36x36 DXF template for?
Shower Pan - Linear Drain Center 30" - 36x36 is a architectural stone DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Shower Pan - Linear Drain Center 30" - 36x36 DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Shower Pan - Linear Drain Center 30" - 36x36 is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Shower Pan - Linear Drain Center 30" - 36x36
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Shower Pan - Linear Drain Center 30" - 36x36 is filed under Architectural Stone. The normalized record lists width 36", depth 36", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Architectural Stone files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Shower Pan - Linear Drain ADA Back 30" - 36x36, Shower Pan - Linear Drain ADA Back 30" - 48x36, Shower Pan - Linear Drain Back Wall 24" - 36x36 to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
This professional-grade DXF template provides complete fabrication geometry for a 36-inch by 36-inch stone shower pan with a 30-inch linear drain positioned at the center. Linear drain systems have become the gold standard in modern luxury bathrooms, offering superior drainage performance while enabling larger format tiles and seamless stone shower floors. Unlike traditional point drains that require complex four-way slopes, linear drains allow for a simpler single-plane slope that showcases the natural beauty of stone slabs. The template includes precisely calculated slope geometry, drain channel routing paths, and all necessary reference lines for accurate CNC programming or manual layout. The 30-inch drain length provides excellent drainage capacity for this 36x36 configuration, with the center positioning creating balanced water flow from both sides of the shower floor. This design works exceptionally well with granite, marble, quartzite, and engineered quartz materials. Fabricators will find complete technical specifications including drain pocket dimensions, minimum slope requirements, and recommended waterproofing integration details. The DXF file is compatible with all major CNC fabrication equipment and CAD software, allowing seamless workflow integration from design to installation.
Installation Overview
Installation begins with verifying the rough plumbing position matches the template's center drain location. The linear drain body must be set at the correct height to achieve the required slope, typically 1/4 inch per foot toward the drain channel. Apply thin-set mortar to the prepared substrate, ensuring complete coverage without voids that could trap water. Position the stone pan carefully, checking slope with a level and confirming proper alignment with shower walls. The drain channel should be shimmed if necessary to maintain consistent slope across the entire surface. Seal all perimeter joints and drain connections using appropriate waterproofing membrane compatible with your linear drain system. Allow adequate cure time before installing wall tile or testing the shower. Professional installation ensures proper drainage performance and long-term durability.
CNC Cutting Notes
Program the top surface slope as a gentle planar cut, maintaining consistent 1/4 inch per foot pitch toward the center drain location. The drain channel pocket requires precise depth control, typically 1/8 inch deeper than the drain flange thickness to ensure proper seating. Use appropriate tooling for the material: diamond-coated bits for natural stone, carbide for quartz. Recommended feed rates should be reduced by 20% when cutting the drain channel to prevent chipping. The perimeter edge should be finished with a light eased edge or micro-bevel for safety and professional appearance. If fabricating from 3cm material, consider laminating 2cm slabs for weight reduction while maintaining structural integrity. Always perform dry-fit verification with the actual drain body before final finishing to confirm proper depth and alignment.
Material Compatibility
Ideal for granite, marble, and quartzite slabs with consistent thickness and minimal natural fissures that could compromise waterproofing. Engineered quartz materials work exceptionally well due to their uniform density and non-porous nature. Denser stones like absolute black granite provide superior long-term performance in wet environments. Materials with pronounced veining patterns can create striking visual effects when the grain pattern is aligned parallel to the drain channel. Avoid highly porous stones without proper sealing, and verify all materials meet slip-resistance requirements for shower applications.
Where to Buy
This DXF template is available as a free download from Slabwise. Stone fabricators can source compatible linear drain systems from manufacturers including Schluter-Kerdi-Line, Infinity Drain, QuickDrain, and ACO ShowerDrain. Natural stone slabs suitable for shower pan fabrication are available through local stone suppliers and distributors carrying granite, marble, and quartzite. Engineered quartz materials can be sourced from Caesarstone, Cambria, Silestone, and other premium surface brands.