5-Panel Shower - Standard 5-Panel - 48x36
Description
Download free 5-panel shower wall DXF template. Standard 5-Panel with return panels for frameless glass.
Related Templates
5-Panel Shower - 5-Panel with Bench Seat - 48x36
5-Panel Shower - 5-Panel with Bench Seat - 60x36
5-Panel Shower - 5-Panel with Corner Shelf - 48x36
5-Panel Shower - 5-Panel with Corner Shelf - 60x36
Answer summary
What is the 5-Panel Shower - Standard 5-Panel - 48x36 DXF template for?
5-Panel Shower - Standard 5-Panel - 48x36 is a architectural stone DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the 5-Panel Shower - Standard 5-Panel - 48x36 DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
5-Panel Shower - Standard 5-Panel - 48x36 is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for 5-Panel Shower - Standard 5-Panel - 48x36
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
5-Panel Shower - Standard 5-Panel - 48x36 is filed under Architectural Stone. The normalized record lists no normalized dimensions are listed in the template record, so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Architectural Stone files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with 5-Panel Shower - 5-Panel with Bench Seat - 48x36, 5-Panel Shower - 5-Panel with Bench Seat - 60x36, 5-Panel Shower - 5-Panel with Corner Shelf - 48x36 to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
Transform standard alcove showers into premium stone installations with our precision-engineered 5-panel shower wall template. This 48x36 inch configuration provides complete fabrication specifications for creating seamless stone or solid surface shower enclosures that elevate any bathroom project from builder-grade to luxury. Designed for professional stone fabricators and installers, this template delivers exact cutting paths for all five panels needed in a complete alcove shower system. The 48-inch back wall fits standard residential shower openings while 36-inch side walls provide comfortable interior dimensions. Six-inch return panels create finished edges that integrate perfectly with frameless glass door systems or traditional shower curtains. This versatile standard configuration works across residential remodels, new construction, hospitality projects, and commercial applications where durability and aesthetics both matter.
Installation Overview
Installation begins with careful field measurement to verify your shower cavity matches the 48x36 footprint and provides adequate depth for the 6-inch return panels. The back wall panel serves as the primary installation reference, mounting to properly prepared and waterproofed substrate using moisture-cure urethane adhesives or epoxy systems rated for continuous wet exposure. Side panels align with marked layout lines, maintaining consistent reveal dimensions at all corners. Return panels finish the exposed edges with clean, waterproof transitions ideal for glass door mounting hardware. All panel joints require appropriate waterproofing treatment, typically accomplished with color-matched epoxy or high-performance silicone sealants. Verify panel plumb and alignment during installation as adjustments become difficult after adhesive sets. The clean design without cutouts simplifies installation while allowing flexibility for valve and showerhead placement during rough-in coordination.
CNC Cutting Notes
CNC fabrication requires 3cm thick stone slabs with minimum dimensions of 96x48 inches to efficiently nest all five panels with minimal waste. Program your CNC with appropriate diamond-coated router bits - typically 10mm diameter for primary edge cutting and optional 6mm bits if adding decorative edge profiles. This standard template features clean rectangular panels without specialized cutouts, allowing for straightforward programming and reduced runtime compared to templates with integrated features. All exposed edges should receive appropriate edge treatment based on project specifications - eased edges provide safety and modern aesthetics while quarter-round or full bullnose profiles offer traditional styling and improved water management. Maintain minimum 10mm radius on all corners to prevent chipping during handling and installation. Average CNC runtime is 30-40 minutes per panel depending on material hardness and selected edge profiles.
Material Compatibility
This versatile template works excellently with virtually all countertop materials in 3cm thickness, including granite, marble, quartzite, engineered quartz, and porcelain slabs. The absence of complex cutouts reduces stress concentration points, making it suitable even for softer materials like marble when properly sealed for wet environments. Granite and quartzite provide maximum durability with natural beauty and pattern variation. Engineered quartz offers consistent appearance and superior stain resistance ideal for high-use commercial installations. Porcelain slabs deliver exceptional water resistance with reduced weight for easier installation. For book-matched or vein-matched installations, plan panel layout to create visual continuity across the three primary wall surfaces. Darker materials may show water spotting more readily and benefit from premium sealing treatments.
Where to Buy
Download this professional DXF template free from Slabwise for unlimited use in your fabrication projects. No purchase necessary - simply download and import into your CNC software, CAD program, or waterjet system. For custom template modifications, technical support, or commercial licensing for high-volume fabrication operations, contact our professional services team through the Slabwise platform.