3-Panel Shower - With Shampoo Niche - 36x36
Description
Download free 3-panel shower wall DXF template. With Shampoo Niche configuration, 36x36 shower size.
Related Templates
Answer summary
What is the 3-Panel Shower - With Shampoo Niche - 36x36 DXF template for?
3-Panel Shower - With Shampoo Niche - 36x36 is a architectural stone DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the 3-Panel Shower - With Shampoo Niche - 36x36 DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
3-Panel Shower - With Shampoo Niche - 36x36 is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for 3-Panel Shower - With Shampoo Niche - 36x36
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
3-Panel Shower - With Shampoo Niche - 36x36 is filed under Architectural Stone. The normalized record lists no normalized dimensions are listed in the template record, so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Architectural Stone files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with 3-Panel Shower - With Corner Shelf Cutout - 36x36, 3-Panel Shower - With Corner Shelf Cutout - 48x36, 3-Panel Shower - Waterproof Curb Piece - 36x36 to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
Efficient storage solutions in standard-sized showers require carefully proportioned features that provide functionality without overwhelming the available space or disrupting material aesthetics. This 3-panel shower template integrates a compact shampoo niche specifically dimensioned for essential toiletry storage in 36x36-inch shower enclosures. The smaller niche format provides adequate space for shampoo bottles, soap, and razors while maintaining visual balance within the panel composition and preserving maximum wall surface for showcasing stone materials. Shampoo niches represent a scaled approach to shower storage, sized for primary toiletries rather than comprehensive storage of multiple users' products. This focused functionality works particularly well in secondary bathrooms, guest showers, or master bathrooms where separate vanity storage handles most products and the shower niche serves daily-use essentials only. The compact format minimizes the structural impact of the cutout on the panel while providing sufficient storage to eliminate hanging caddies and suction organizers that detract from clean stone aesthetics. Fabricators serving production builders, multi-family developers, and value-conscious remodeling markets will find compact niches offer a middle ground between flat panels and more elaborate storage features. This template enables efficient fabrication of niche-equipped panels where the feature adds value without significantly increasing material waste or programming complexity. Whether working with builder-grade quartz, mid-range granite, or economy marble, this template provides a practical approach to incorporating storage features that enhance functionality and market appeal without premium pricing implications.
Installation Overview
Installing shower panels with compact shampoo niches follows standard procedures with scaled niche provisions. The wall framing requires a recessed cavity matching the niche dimensions, typically created with blocking around a smaller opening compared to full-size storage niches. Install a prefabricated niche box sized for shampoo storage or create a custom waterproof niche liner appropriate for the compact opening. The reduced niche size simplifies waterproofing integration compared to larger features. Mount the stone panel over the prepared niche assembly, ensuring the cutout aligns properly with the niche opening. The smaller cutout dimensions place less structural demand on the panel, allowing standard installation techniques with mechanical fasteners and adhesive. Seal the niche perimeter where stone meets the niche liner with waterproof caulk.
CNC Cutting Notes
Programming compact shampoo niche cutouts requires precision dimensioning to create functional storage within limited space. Typical shampoo niche dimensions range from 8x12 inches to 10x16 inches, providing adequate bottle storage without excessive material removal. Program corner radii between 4-8mm to reduce stress while maintaining a refined appearance proportional to the smaller cutout. All interior edges receive polished edge treatment matching panel perimeter edges. Position the cutout at comfortable reach height, typically 48-60 inches from the bottom edge for standing access to daily-use products. The compact cutout creates minimal structural impact, allowing positioning closer to panel edges compared to larger niches, though minimum 3-inch edge distances should still be maintained for structural security.
Material Compatibility
Compact shampoo niche cutouts work well across the full range of natural stone and engineered materials due to the reduced structural impact of the smaller opening. Engineered quartz performs reliably with small cutouts, offering consistent properties and clean cutting. Granite accommodates compact niches easily, with the smaller opening presenting minimal risk even in materials with pronounced veining. Marble works well for shampoo niches since the limited cutout size preserves panel integrity while the reduced opening is less likely to intersect natural fracture planes. Material thickness of 2cm is acceptable for compact niche applications, though 3cm provides additional security and is preferred for premium installations. The smaller cutout dimension makes this template one of the most material-friendly niche options available.
Where to Buy
This DXF template is available as a free download from Slabwise, providing specifications for shower panels with compact shampoo niche cutouts optimized for standard residential shower installations. The file includes recommended cutout dimensions, positioning guidelines, and edge treatment specifications for efficient fabrication. Compatible with all professional CNC programming software including Alphacam, Vectric, MasterCAM, and RhinoCAM. Fabricators can explore additional niche sizes and shower configurations through the Slabwise architectural template library.