Raised Hearth 2" - 60x20
Description
Download free raised hearth 2" DXF template, 60x20. Stone fireplace hearth slab for fabrication.
Dimensions
- Overall Width
- 60"
- Overall Depth
- 20"
Specifications
- Downloads
- 0
Related Templates
Answer summary
What is the Raised Hearth 2" - 60x20 DXF template for?
Raised Hearth 2" - 60x20 is a architectural stone DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Raised Hearth 2" - 60x20 DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Raised Hearth 2" - 60x20 is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Raised Hearth 2" - 60x20
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Raised Hearth 2" - 60x20 is filed under Architectural Stone. The normalized record lists width 60", depth 20", so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Architectural Stone files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Corner Hearth - 48x18, Corner Hearth - 60x20, Corner Hearth - 72x22 to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
Create distinctive fireplace installations with this 2-inch raised hearth template designed for medium to large fireplace applications. The 60x20 inch dimensions provide generous coverage for wider fireplace openings while the elevated profile adds architectural sophistication and enhanced heat protection. This professional DXF template delivers precise fabrication specifications for stone craftsmen working with granite, marble, quartz, and premium natural stone materials. The 2-inch raised platform transforms standard hearth installations into architectural focal points that define living spaces. The elevation creates visual separation from surrounding flooring while providing practical benefits including increased heat standoff distance and accommodation for under-hearth lighting systems. The expanded 60-inch width suits contemporary great room designs and larger traditional fireplaces, maintaining proportional balance with substantial fireplace surrounds and mantels. Engineered for professional stone fabricators and CNC operators, this template includes complete cutting paths, edge profile specifications, and dimensional details required for accurate production. The raised design complements both modern minimalist aesthetics and classic fireplace architecture. Compatible with all industry-standard CAD software platforms and CNC fabrication systems, this template streamlines material layout, reduces waste, and ensures consistent results across custom installations requiring elevated hearth platforms.
Installation Overview
Installing a 60x20 raised hearth requires robust structural support beneath the entire raised platform. The support system must accommodate the increased weight of wider stone while maintaining the precise 2-inch elevation across the full 60-inch span. Common support methods include continuous steel channel frames, reinforced masonry bases, or custom-built platforms with cement board surfacing. Verify structural capacity of floor systems, particularly for installations over wooden subfloors requiring additional reinforcement. Position the hearth to maintain code-required clearances from combustible materials - typically 16 inches in front of fireplace opening and 8 inches on sides. The raised profile creates a natural safety boundary but does not substitute for code compliance. Secure the hearth using high-temperature construction adhesive combined with mechanical anchors at strategic points. Complete edge finishing before installation when practical given the slab's size. Allow proper curing before heat exposure or loading.
CNC Cutting Notes
CNC fabrication of this 60-inch raised hearth template requires attention to the wider span and raised profile specifications. Ensure adequate machine table support across the full 60x20 dimensions to prevent material flexing during cutting operations. Begin programming with exterior perimeter cutting to establish the precise 60x20 footprint. For laminated raised construction, prepare mating surfaces with parallel cuts before bonding. If routing from thick stock, use progressive depth passes with conservative feed rates to maintain edge quality on the 2-inch profile. Tool path optimization should ensure consistent edge profile depth and finish across the extended 60-inch length. Edge profiling typically employs eased, beveled, or straight polished treatments that emphasize the raised platform aesthetic. Pre-drill mounting holes while the piece remains secured on the CNC bed. Verify all specifications against field measurements, as wider hearths often integrate with custom fireplace surrounds requiring precise dimensional coordination.
Material Compatibility
Select stone materials with structural integrity suitable for the 60-inch span at 2-inch thickness. Laminated construction using two 3cm pieces bonded with color-matched epoxy is common for raised hearths. Alternatively, specify single-piece stone at 5cm or 6cm thickness for seamless raised profiles. Granite provides excellent strength-to-weight ratio for wider raised hearths with extensive color and pattern selections. Marble creates luxurious elevated platforms but requires reinforcement consideration for wider spans and comprehensive sealing for heat exposure. Engineered quartz offers predictable performance across wide formats with factory-controlled consistency. Soapstone delivers traditional raised hearth aesthetics with natural heat resistance. Limestone and travertine provide textured character but demand more frequent maintenance. Evaluate material weight implications for support structure design - 60x20 hearths in 3cm granite weigh approximately 160-180 pounds before accounting for raised construction thickness.
Where to Buy
Source stone materials for raised hearth fabrication through wholesale architectural stone suppliers and fabrication material distributors. National suppliers like MSI, Bedrosians, and Daltile stock appropriate thickness materials for raised hearth construction. Regional stone yards often provide competitive pricing and local delivery for thicker slabs and custom orders. For engineered quartz in appropriate thicknesses, consult authorized Cambria, Caesarstone, and Silestone dealers. Many suppliers offer technical support for material selection based on hearth dimensions and installation requirements, including recommendations for bonding materials suitable for laminated raised assemblies.