Waste King 1020 Air Switch
Description
The Waste King 1020 air switch provides reliable, touch-activated garbage disposal control without electrical wiring at the countertop level. This professional fabrication template delivers precise dimensions for 1.375-inch diameter holes in natural stone, engineered quartz, and solid surface materials. Waste King has manufactured garbage disposals and accessories since 1985, building a reputation for durable, affordable products. The 1020 air switch features a simple pneumatic design that activates the disposal via air pressure, eliminating shock hazards in wet environments. Fabricators trust accurate templates to ensure proper fit and prevent material waste on expensive stone slabs.
Dimensions
Specifications
- Manufacturer
- Waste King
- Model Number
- 1020
- Downloads
- 0
Related Templates
Answer summary
What is the Waste King 1020 Air Switch DXF template for?
Waste King 1020 Air Switch is a appliance cutouts DXF template for countertop fabrication. Use it only after matching the manufacturer, model, dimensions, variant, and shop workflow to the actual job.
Risk check: Similar-looking products can use different cutout geometry. Confirm the official spec, shop tolerance, material behavior, and CNC output before production.
Next step: Run a DXF check, compare related templates, and keep the current manufacturer spec with the job packet.
Template decision guide
Should you use the Waste King 1020 Air Switch DXF template?
Use the template page to shortlist a production file, then verify the exact model, variant, and machine workflow before cutting.
Best fit
Waste King 1020 Air Switch is most useful when the product, manufacturer, model, install type, and variant match the job you are fabricating.
What to compare
Compare model number, dimensions, reveal or overhang, bowl or appliance geometry, material thickness, and CNC output requirements.
Risk check
Do not use a similar-looking template as a final production file. Small changes in flange, radius, trim, or reveal can cause a failed cutout.
Evidence to verify
Check the current manufacturer spec, field measurement, template preview, DXF layers, and a shop-approved tolerance before production.
Page-specific notes
Page-specific notes for Waste King 1020 Air Switch
These notes are assembled from this exact template record, its category, available variants, and nearby template comparisons. They are meant to make the page more useful than a generic download page.
Exact record SlabWise is using
Waste King 1020 is filed under Appliance Cutouts. The normalized record lists no normalized dimensions are listed in the template record, so the safest use is as a production starting point that still gets checked against the current job packet.
Variant choice
This record is shown as a single template variant. Treat that as a reason to verify reveal, overhang, and cutout assumptions before the file reaches production.
Category-specific production check
Appliance Cutouts files should be checked for fit against material thickness, edge treatment, sink or appliance clearance, CNC layer expectations, and the shop's preferred tolerance before cutting customer material.
Closest comparisons
Before choosing this file, compare it with Brasscraft ASB-1 Air Switch Button, Dual Flush DF-001 Dual Air Switch, Franke WD-50 Air Switch to catch small model, radius, flange, or layout differences that can change the final cut.
Evidence already attached
This page has extra enrichment for installation overview, CNC cutting notes, material compatibility, buying context. Use those notes as decision support, then keep the official product spec with the job.
The Waste King 1020 air switch provides reliable, touch-activated garbage disposal control without electrical wiring at the countertop level. This professional fabrication template delivers precise dimensions for 1.375-inch diameter holes in natural stone, engineered quartz, and solid surface materials. Waste King has manufactured garbage disposals and accessories since 1985, building a reputation for durable, affordable products. The 1020 air switch features a simple pneumatic design that activates the disposal via air pressure, eliminating shock hazards in wet environments. Fabricators trust accurate templates to ensure proper fit and prevent material waste on expensive stone slabs.
Installation Overview
Installing the Waste King 1020 air switch begins with precise hole placement during the template phase. The switch requires a 1.375-inch (1-3/8 inch) diameter hole positioned 2-4 inches from the sink rim for comfortable access. During fabrication, drill or cut the hole perpendicular to the countertop surface to ensure proper mounting nut engagement. The air switch assembly consists of a countertop push button, mounting shank with rubber gasket, plastic mounting nut, air tube (typically 6 feet long), and control module that connects to the disposal. Installation involves inserting the switch assembly through the hole from above, positioning the rubber gasket against the finished surface, and tightening the plastic nut from below to create a watertight seal. Route the air tube through the sink cabinet to the disposal-mounted control module. The system operates via air pressure when the button is pressed, sending a pneumatic pulse through the tube to trigger the electrical relay at the disposal. No electrical connections are required at the countertop, making it safe for use near water sources.
CNC Cutting Notes
CNC fabrication of the Waste King 1020 air switch hole requires programming for a 1.375-inch finished diameter. Use diamond-coated router bits suitable for the material hardness, with spiral upcut geometry for clean top-surface edges. Program multiple depth passes rather than full-depth plunge cutting to reduce tool stress and prevent material cracking. For granite and engineered quartz, typical feed rates range from 400-600 IPM with 3-4mm depth per pass. Maintain constant water cooling throughout the cutting process to prevent thermal damage and control dust. The relatively small hole diameter makes this a straightforward CNC operation that can be nested with sink cutouts and other accessories for efficient material usage. For hand fabrication, use a 1-3/8 inch diamond hole saw with pilot bit and guide collar, applying steady downward pressure while allowing the diamond segments to do the cutting work.
Material Compatibility
The Waste King 1020 air switch template works with all common countertop materials including granite, marble, quartzite, soapstone, engineered quartz brands (Caesarstone, Silestone, Cambria, Hanstone), solid surface materials (Corian, Hi-Macs, Staron), and ultra-compact surfaces (Dekton, Neolith, Lapitec). The 1.375-inch hole diameter provides adequate mounting stability without requiring excessive material removal. The mounting system accommodates counter thicknesses from 0.75 inches to approximately 1.75 inches, covering standard 2cm and 3cm slab installations. The rubber gasket conforms to both polished and textured finishes including honed, leathered, and flamed surfaces. For laminate countertops, the air switch can be installed but verify sufficient edge distance to prevent delamination. When working with natural stone featuring dramatic veining or inclusions, position the hole to avoid structural weak points.
Where to Buy
Waste King 1020 air switches are available through plumbing supply distributors, home improvement retailers, and online marketplaces. Major retailers include Home Depot, Lowe's, Menards, and Ace Hardware. Plumbing professionals can purchase through wholesale distributors including Ferguson, HD Supply, and regional plumbing supply houses. Online availability includes Amazon, Build.com, and PlumbersStock. The 1020 is typically sold as a complete kit including the button assembly, control module, and air tube with installation hardware. Pricing generally ranges from 25-40 USD, making it an affordable option compared to premium decorative air switches. When ordering, verify compatibility with your specific garbage disposal model, though Waste King air switches work with most major disposal brands including InSinkErator, Moen, and KitchenAid.