Loading…
You already know it. That pile of remnants in the corner of your yard? The offcuts that are too small for anything? That's not scrap. That's cash you paid for and never got back.
The industry average waste rate is 15-25%. Some shops we've talked to are at 43% and didn't even know it until they measured.
Show me what I'm wastingYour guys are eyeballing layouts on the slab. They're drawing with a Sharpie, leaving a half inch here, an inch there "just in case." By the end of the week, you've got a pile of remnants that are too awkward to use and too expensive to throw away.
Then the real cost hits: you've got a kitchen job that needs 62 square feet. You pull a slab that's 54 square feet. Doesn't quite fit. So you pull a second slab, use 8 square feet of it, and the rest goes in the pile. You just paid $1,800 for 8 square feet.
And it keeps compounding. Every slab you don't optimize is money you already spent walking out the door. On a 10% margin, a shop doing $1M/year in revenue needs to sell $100,000 in extra jobs just to cover their waste. That's not growth. That's running in place.
You're not in the countertop business. You're in the "try not to waste $5,000 a month in stone" business.
Takes 30 seconds. The answer might make you sick.
Industry avg: 15-25%. Be honest.
That's 35 slabs worth of material in the dumpster.
SlabWise Pro costs $299/mo. You save $5,240/mo.
That's a 18x return. Every single month.
Drop in your DXF file (or grab one from our 25,000+ library). Enter your slab dimensions. SlabWise arranges every piece for maximum yield — factoring in grain direction, defect zones, seam placement, and kerf width. It does in 30 seconds what takes your best guy 20 minutes. And it does it better.
No guessing. No "that looks about right." You see every piece placed on the slab, with measurements, before the saw touches stone. If something doesn't fit, you know now — not when you're staring at a $4,000 mistake.
Machine-specific files for Breton, Park Industries, Northwood, BACA, and 50+ more. Correct kerf, approach angles, post-processor format. No file conversion headaches. No "it worked on screen but cut wrong."
If they can take a photo on their phone, they can use SlabWise. We built this for dusty gloves and cracked screens, not tech people. Big buttons, simple screens, no training manual. Most shops have their first nesting job running within 5 minutes of signing up.
Setup takes 90 seconds. Sign up, enter your shop name, upload a DXF. That's it. There's no onboarding call, no implementation specialist, no 3-week rollout plan. You have a nesting result before your coffee gets cold.
So have we. That's why there's no contract, no setup fee, and no credit card required to start. Try it for 14 days on the full Pro plan. If it doesn't save you money, walk away. We don't charge you a penny until you decide it's worth it.
Look at your calculator numbers above. If SlabWise saves you even one slab per month — one $1,800 slab that would've been wasted — it pays for itself 6x over. And most shops save far more than that. The question isn't whether you can afford it. It's whether you can afford not to.
14-day free trial. No credit card. No contract.
You know the waste is there. You just saw the number. The only question is whether you want to keep paying it.
No credit card required. Full Pro plan. Cancel anytime.